Editor's Choice


Where are the youth?

30 August 2023 Editor's Choice


Peter Howells, Editor

During the month of July, I attended the excellent KwaZulu-Natal Industrial Technology Exhibition in Durban. Walking around the show and chatting to various exhibitors, I was suitably impressed both by the way in which the show was organised, and the wealth of knowledge presented on each of the stands.

However, as I moved from stand to stand, I was struck by a realisation that caused a few alarms bells to ring rather loudly in my oldish head: where were the youth, the budding engineers and technicians below the age of 30? The show was predominantly middle-aged and upwards. This is a worrying observation.

And yes, I know that the university and technical college programmes are at capacity in the various engineering disciplines. I just do not know why they do not seem to be interested in the largest industrial trade show in KZN. The youth should have been there in their droves, looking at the stalls, speaking with engineers who have oodles of experience, getting advice from engineers with a wealth of knowledge.

I believe that it is the universities and colleges themselves that need to be proactive in this regard. It is not difficult to organise a vehicle to transport your top 15 students to the show, walk around with them and guide them. The show could be – and SHOULD be – a technical outing that is used as the perfect teaching and learning tool.

But of course, although some blame can be laid at the feet of the tertiary institutions, I believe that many students are choosing engineering – and electronic and power engineering, in particular – as a job and NOT as a career. Students should have to write an aptitude test on application to the engineering faculty to assess their readiness and, dare I say, eagerness for the programme. This would hopefully serve as a marker to help determine the likelihood of success in a chosen engineering field. And do not think that I am promoting a technical assessment here. I think questions such as ‘List three of your interests’, ‘What do you do in your

spare time?’, and ‘Why have you chosen to study engineering?’ will be able to tell you more than you need to know about the respective candidates.

All forms of engineering should be a lifelong pursuit of excellence, and with that comes continuous learning. The engineering fields are changing so rapidly, as new technology is being developed, that choosing to not keep abreast of what is happening in and around you in your field will cause you to become obsolete very quickly. This magazine is a perfect example of how rapidly technology is changing and developing – every month new devices and technologies are documented that are based on new technology.

I do not believe that enough is being done to promote the sciences and engineering fields starting at school level and continuing into tertiary level. Engineering is a rewarding career at the forefront of new technology. As engineering professionals, we need to take responsibility in promoting it as such.

I challenge each technical professional to mentor someone who is currently either starting out on the engineering journey or is on the fence about what career to work towards. Who knows, this could even ultimately benefit you in the long run.




Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Potential risks of plasma treatment on PCBs
MyKay Tronics Editor's Choice
Plasma treatment involves exposing PCBs to an ionised gas, known as plasma, but despite many advantages, several risks must be managed to ensure safe and effective plasma application in EMS.

Read more...
X-band radar
RF Design Editor's Choice Telecoms, Datacoms, Wireless, IoT
X-band radar systems, particularly those leveraging beamforming ICs (BFICs), advanced gallium nitride (GaN) and gallium arsenide (GaAs) components, are leading the way in providing the high-performance radar capabilities required for modern defence and surveillance.

Read more...
LED driver for industrial power supply indication
Altron Arrow Editor's Choice Circuit & System Protection
A simple and small solution for driving an LED to provide visual feedback in the presence/absence of a system’s power using a chip not originally designed for this purpose.

Read more...
Case Study: Siemens Valor automation solution
ASIC Design Services Editor's Choice Manufacturing / Production Technology, Hardware & Services
Electronics manufacturer BMK used Siemens Valor to enhance accuracy and speed up bill-of-materials quotations.

Read more...
Four ways to enhance IoT battery performance using emulation software
Concilium Technologies Editor's Choice
Battery life affects the cost and reliability of IoT-based infrastructure and is a key purchasing consideration for consumer electronic IoT devices.

Read more...
NuWave Technologies: Excellence in electronic component procurement
NuWave Technologies Editor's Choice
Based in Randburg, Gauteng, NuWave Technologies is built on core values of integrity, honesty, transparency, and service excellence.

Read more...
Arduino platform with Analog Devices technology for flexible industrial control
Altron Arrow Editor's Choice DSP, Micros & Memory
Software-configurable systems enable industrial OEMs to deliver unprecedented flexibility to the factory floor, while simplifying product complexity.

Read more...
Accelerating RF PCB design in a 5G world
ASIC Design Services Editor's Choice Design Automation
Billions of IoT devices coming online in the coming years will require RF design capabilities that support ultra-fast 5G speeds.

Read more...
Achieving lowest cost, scalable and dynamic wireless mesh network installations
CST Electronics Editor's Choice Telecoms, Datacoms, Wireless, IoT
In many situations it is desirable for sensors to be connected wirelessly in a mesh network as this saves infrastructure and cost since long cabling runs are not required.

Read more...
Residues on PCBs – Causes and remedial measures
Electronic Industry Supplies Editor's Choice Manufacturing / Production Technology, Hardware & Services
Soldering with wire and iron leaves process judgments up to individual operators, and can produce a wide variety of defects, scrap, or long-term quality issues.

Read more...