Telecoms, Datacoms, Wireless, IoT


Quectel launches a high-performance single-band GNSS module

30 May 2022 Telecoms, Datacoms, Wireless, IoT

Quectel Wireless Solutions has announced the release of its LC76G module, a single-band compact GNSS module featuring fast and accurate location performance as well as ultra-low power consumption. The LC76G has already entered mass production with sufficient supply to meet the needs of the global positioning market.

Based on the Airoha AG3352 platform, the LC76G can concurrently receive and process signals from all constellations (GPS, GLONASS, BeiDou, Galileo and QZSS), which in combination with the support of SBAS, greatly increases the number of visible satellites and enhances positioning accuracy. The LC76G module can receive signals from up to 47 satellites and achieve 1,5 m positioning accuracy, representing a 40% improvement over previous generations of devices.

Available in a cost-optimised version as well as a low-power version, the LC76G low-power version consumes less than 9mA @3V with all four constellations enabled, allowing for a 72% reduction in power required than previously possible. This makes the LC76G extremely attractive for battery-operated devices such as wearable personal trackers, wildlife and livestock tracking and portable container trackers.

Featuring an internal SAW filter and integrated LNA, the LC76G can be connected directly to a passive patch antenna and provides filtering against unwanted interference, ensuring excellent performance even while driving through dense urban canyons.

Integrated AGNSS technology EPO is supported on the LC76G module and reduces the time to first fix (TTFF) with a hot start taking less than 1 second, a warm start within 2 seconds, while the cold start can obtain accurate tracking fixes within 15 seconds. The faster GNSS fixes make it possible to use accurate positioning and navigation services anytime and anywhere with a smaller power budget than previously possible.

While EPO requires manual download of predicted orbits, the LC76G also supports EASY (Embedded Assist System) where predicted orbit information is collected directly from the satellites and provides for up to three days of accelerated fixes. Both EPO and Easy are available for each constellation, allowing for faster TTFF and reduced dependency on any specific constellation.

Featuring an LCC form factor and an ultra-compact size of 10,1 x 9,7 x 2,4 mm, the footprint of the LC76G is compatible with other industry solutions as well as Quectel’s legacy L76 and L76-LB modules, allowing for a smooth migration of existing designs to the latest low-power GNSS technology.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Full sensor to cloud solution
CST Electronics Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.

Read more...
Long-range Wi-Fi HaLow module
TRX Electronics Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.

Read more...
Quectel launches 3GPP NTN comms module
Quectel Wireless Solutions Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.

Read more...
SIMCom’s A7673x series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.

Read more...
Accelerating the commercialisation of the 5G IoT markets
Altron Arrow Editor's Choice Telecoms, Datacoms, Wireless, IoT
Fibocom unveils Non-Terrestrial Networks (NTN) module MA510-GL, enabling satellite and cellular connectivity to IoT applications.

Read more...
ESP32-P4 high-performance MCU
iCorp Technologies AI & ML
Powered by a dual-core RISC-V CPU running up to 400 MHz, ESP32-P4 also supports single-precision FPU and AI extensions, thus providing all the necessary computational resources.

Read more...
Long-range connectivity module
Avnet Silica Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.

Read more...
4G LTE-M/NB-IoT connectivity reference design
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.

Read more...
Antennas to meet all connectivity requirements
Electrocomp Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.

Read more...
Introducing SIMCom’s new A7673X series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.

Read more...