Pulse Electronics introduced a new line of power splitters for its PIMinator low passive intermodulation (PIM) indoor distributed antenna system (iDAS) family.
When there are multiple antennas in a building, the signals need to be split between the antennas. Pulse’s power splitters are designed to work with its PIMinator line of antennas to ensure a PIM spec of -155 dBc at 2x20 Watts. Low PIM is key to the performance of DAS systems because it reduces or degrades base station performance. With low PIM there are fewer dropped calls, higher data rates, and fewer problems for cellular phone users and operators to deal with.
The new range consists of four splitters: the DASSPLIT2WNF 2-way power splitter with N female connectors; the DASSPLIT3WNF 3-way power splitter with N female connectors; the DASSPLIT4WNF 4-way power splitter with N female connectors; and the DASSPLIT2WDIN 2-way power splitter with female 7/16 DIN connectors.
All of the new splitters measure 191,2 mm in length, 60,6 mm in width and 25 mm in height. They meet the demanding requirements of cellular operators and integrators of low PIM components for 2G, 3G and LTE/4G bands around the world. An iDAS allows users to receive cellular coverage inside a building instead of depending on a cell site outside the building.
X-band radar RF Design
Editor's Choice Telecoms, Datacoms, Wireless, IoT
X-band radar systems, particularly those leveraging beamforming ICs (BFICs), advanced gallium nitride (GaN) and gallium arsenide (GaAs) components, are leading the way in providing the high-performance radar capabilities required for modern defence and surveillance.
Read more...Reference board for cardio monitoring Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The STDES-ESP01 reference board from STMicroelectronics demonstrates the capability of the ST1VAFE6AX and ST1VAFE3BX biosensors to detect ECG and SCG signals.
Read more...LTE Cat 1 bis communication iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
The EG810M series is a series of LTE Cat 1 bis wireless communication modules specially designed by Quectel for M2M and IoT applications.
Read more...Quad-channel 16-bit converter RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
The ARF0468 from Advance RF is a quad-channel mixed-signal processing chip, with each channel comprising three major functional modules: ADC/DDC/DDS.
Read more...ST MCUs extend ultra-low power innovation Altron Arrow
DSP, Micros & Memory
STMicroelectronics has introduced new STM32U3 microcontrollers with cutting-edge power-saving innovations that ease deployment of smart connected tech, especially in remote locations.
Read more...Multicell battery monitoring Altron Arrow
Power Electronics / Power Management
The LTC6811 from Analog Devices is a multicell battery stack monitor that measures up to 12 series connected battery cells with a total measurement error of less than 1,2 mV.
Read more...Tactical navigation system Etion Create
Telecoms, Datacoms, Wireless, IoT
Etion Create’s CheetahNAV Compact is a versatile tactical navigation system designed for security services, emergency services, and light all-terrain vehicles (ATVs) using offline navigation maps.
Read more...Smart module for multi-media devices iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Powered by a Qualcomm processor, Quectel’s new SC200V is designed to deliver exceptional performance across system capabilities, multimedia functions, and network connectivity.
Read more...Remote provisioning firmware added to SIMCom modules Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently announced that its range of Cat 1 bis IoT modules are now being prepared with the firmware necessary to support SGP.32 functionality.
Read more...GNSS antenna redefining what’s possible RF Design
Telecoms, Datacoms, Wireless, IoT
u-blox has achieved what was once thought impossible with the launch of the DAN-F10N, the industry’s smallest and most reliable L1, L5 dual-band GNSS antenna module.
printer friendly version