Maxim introduced the MAX16055, a hex-voltage microprocessor supervisor with integrated reset timing, which eliminates the need for an external capacitor.
Whenever one of the six monitored voltages falls below its threshold, the open-drain reset output asserts and remains asserted for at least 140 ms after all six voltages exceed their respective thresholds. The reset output is internally pulled up to VCC to eliminate the need for an external resistor, but can be overdriven to accommodate other logic devices. A manual reset is also provided. There are 10 versions of the MAX16055, which provide different thresholds and supply tolerances to meet all low-voltage system requirements. Preset thresholds for monitoring 3,3; 3; 2,5; 1,8; 1,5; 1,2; 1,1; 1,0; and 0,9 V supplies with -5% and -10% tolerance are available. Additionally, adjustable versions are available to accommodate most standard logic devices.
Achieving lowest cost, scalable and dynamic wireless mesh network installations CST Electronics
Editor's Choice Telecoms, Datacoms, Wireless, IoT
In many situations it is desirable for sensors to be connected wirelessly in a mesh network as this saves infrastructure and cost since long cabling runs are not required.
Read more...Programmable power and data acquisition modules CST Electronics
DSP, Micros & Memory
TapBus programmable power supply, metering and I/O modules include pre-implemented communication interfaces, automatic addressing, encryption, and configurable access control.
Read more...140 W USB-C PD reference design Altron Arrow
Electronics Technology
The design has a wide input range of 90 to 264 V AC, 50-60 Hz, and supports an output voltage range of 5 to 28 V (USB-PD 3.1 specification).
Read more...Easy monitoring of remote farm assets CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec, providers of ultra-low-power bi-directional wireless mesh network hardware and software solutions, is working together with farmIT to enable easy monitoring of remote Australian farm assets.
Read more...Managed gigabit PoE switch CST Electronics
Telecoms, Datacoms, Wireless, IoT
The SISPM1040-582-LRT from Lantronix is a managed PoE++ switch suitable for connecting and powering devices in hardened environments.
Read more...High-performance GNSS module CST Electronics
Telecoms, Datacoms, Wireless, IoT
Simcom’s SIM66D-R can acquire and track any mix of multiple satellite signals, making it useful for determining position in mountainous and dense urban areas.
Read more...NeoCortec wireless mesh networking CST Electronics
Computer/Embedded Technology
The protocol is especially designed to allow real-time routing of data over long distances and multiple hops, while using very little energy.
Read more...Full sensor to cloud solution CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.
Read more...Banana Pi with NPU CST Electronics
AI & ML
The latest Banana Pi SBC, the BPI-M7, is powered by Rockchip’s latest flagship RK3588 octa-core 64-bit processor, with a maximum frequency of 2,4 GHz.
Read more...Hardened-grade network switches CST Electronics
Computer/Embedded Technology
Lantronix’s hardened switches provide Layer 2 or Layer 3 networking, and are available as Power-over-Ethernet (PoE) or Power-over-Ethernet Plus (PoE+).
printer friendly version