Dehn's modular Red/Line multipole DEHNventil M combined lightning current and surge arresters are designed for protecting low voltage installations and terminal devices against surges, even during direct lightning strikes. The devices are used according to the lightning protection zones concept at boundaries 0A - 2.
The all-in-one Type 1 modules are pre-wired combined spark-gap-based lightning current and surge arresters consisting of a base part and plug-in protection module. They provide high system availability due to their RADAX Flow follow-on current limitation. The devices have a discharge capacity up to 100 kA (10/350 μs) and there is no tripping of 32 A gL/gG fuses up to short-circuit currents of 50 kA rms.
By using encapsulated creepage discharge spark gaps, combined with their compact design, the DEHNventil M units are suitable for use in switchgear installations and distribution boards. The surge arresters can be connected in series up to nominal currents of 125 A as per IEC 60364-5-53.
The DEHNventil M units are easily exchanged by simply pressing the module release button, and the user can see the operating state/fault indication by a mark in the inspection window. The system implements monitoring of the neutral module, which is a requirement for maintenance purposes.
Various modules are available for TN-C, TN-S, TT and TN-S systems, as well as single-phase TN, TT and TN systems. DEHNventil M-FM modules have a three-pole terminal for remote signalling. With their floating changeover contact the remote signal can be used as a break or make contact according to the particular circuit concept.
Clearing the Static: Conductive foot, heel and shoe grounders Actum Electronics
Circuit & System Protection
Conductive foot, heel and shoe grounders are used in electrostatic discharge protected areas to provide a path to ground for static electricity.
Read more...LED driver for industrial power supply indication Altron Arrow
Editor's Choice Circuit & System Protection
A simple and small solution for driving an LED to provide visual feedback in the presence/absence of a system’s power using a chip not originally designed for this purpose.
Read more...Clearing the Static: Cleaning in an ESD-protected area Actum Electronics
Circuit & System Protection
Cleaning in a protected electrostatic discharge area is a critical task to maintain the integrity of sensitive electronic components and prevent damage caused by static electricity.
Read more...Ensuring safety with earth leakage protection NewElec Pretoria
Circuit & System Protection
Earth leakage protection helps mitigate the risks of electric shocks, fires, and equipment damage by swiftly identifying faults and disconnecting the power supply, thus safeguarding both human lives and machinery.
Read more...Suppressing EMI with filters Vepac Electronics
Circuit & System Protection
EMI/RFI filters play an important role in reducing the high-frequency noise that is generated by various electrical and electronic devices.
Read more...Patch attenuates like a shielding cabinet Würth Elektronik eiSos
Circuit & System Protection
Würth Elektronik has launched its hybrid WE-EMIP EMI absorber sheet, a convenient solution for reducing electromagnetic interference by up to 40 dB.
Read more...Clearing the Static: Ionisation equipment Actum Electronics
Circuit & System Protection
Electrostatic discharge (ESD) ionisation equipment is designed to neutralise static charges that accumulate on surfaces in environments where ESD-sensitive components or materials are handled. These ...
Read more...Motor and feeder protection for LV and MV environments NewElec Pretoria
Circuit & System Protection
This relay from NewElec is a micro-controller-based precision instrument with ANSI protection elements, advanced control features, and switchgear controller logic integrating motor and feeder control functions.
printer friendly version