DVB-S2 digital BS tuner unit with internal demodulator
5 September 2007
Telecoms, Datacoms, Wireless, IoT
Alps has developed a DVB-S2 (digital video broadcasting - satellite 2) digital BS tuner unit with an internal demodulator, the BSBE2 series, for use in products compatible with high-definition satellite digital broadcasting.
The tuner is compatible with both the high-definition DVB-S2 and standard DVB-S screen formats. While it is useable with both formats, it is the same size as its predecessor, the BSBE1 series (41,0 mm wide x 73,3 mm deep x 13,0 mm high) which could only be used with the DVB-S format. This enables designers to exchange the previous product for the current product in order to reduce the design load on the circuit board.
The tuner's internal demodulator IC causes heat to be generated when the digitally altered signals are modulated. The heat source is in the upper section of the demodulator IC. Opening a hole in the part of the cover over the upper section and bringing the lower section of the circuit board used for the IC into contact with part of the outer cover, creates a double thermal insulation structure which is very effective for dissipating heat.
In addition to preventing the signals emitted by the oscillator inside the tuner from influencing other parts of the product as noise, the cover over the exterior cladding also serves to muffle digital noise emanating from the product's decoder or CPU.
Further reading:
Scalable and secure IoT device onboarding and management
Telecoms, Datacoms, Wireless, IoT
EasyPass is an enhancement within Cambium’s cnMaestro platform, aimed at providing local businesses with secure, efficient, and scalable device management making it ideal for high-demand environments such as educational institutions, retail spaces, and corporate campuses.
Read more...
Industrial-grade Ethernet switches
Vepac Electronics
Telecoms, Datacoms, Wireless, IoT
Covering PoE-powered series and certified models like PROFINET, DNV, and Railway, these products offer reliable networking solutions for diverse industrial applications.
Read more...
Non-reflective SPDT RF switch
RS South Africa
Telecoms, Datacoms, Wireless, IoT
The ADRF5019 from Analog Devices is a non-reflective, single pole, double throw RF switch that operates from 100 MHz to 13 GHz.
Read more...
Ultrawideband Low Noise Amplifier
Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The ADL8101 is an ultrawideband, low noise amplifier that operates from 10 kHz to 22 GHz with typical gain and noise figure of 14 dB and 3,5 dB respectively.
Read more...
Data Centre trends 2025
Telecoms, Datacoms, Wireless, IoT
Innovation in powering and cooling AI racks, management of energy consumption and emissions all to be a focus in 2025.
Read more...
Air temperature and humidity transmitter
Mimic Components
Telecoms, Datacoms, Wireless, IoT
The RHT air temperature and humidity transmitter is a fully wireless solution designed for seamless measurement of temperature and humidity over long distances.
Read more...
Module combines 5G and NTN support
Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions announced the launch of its BG770A-SN ultra-compact 5G-ready satellite communication module, compliant with 3GPP releases 13, 14 and 17.
Read more...
SIMCom’s A7673X series
Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom’s A7673X series is a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.
Read more...
Non-terrestrial network module
Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Fibocom unveiled its MA510-GL (NTN), a non-terrestrial networks module which is compliant with 3GPP Release 17 standard.
Read more...
Cellular IoT connectivity via satellite
Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The Telit Cinterion cellular LPWA module will enable satellite data communication using the NB-IoT protocol, without any special hardware changes required for the integration of the cellular module in the customer application.
Read more...