Dallas Semiconductor's DS80C400 is a networked microcontroller chip that integrates a high-speed 8051 core, a 10/100 Mb Ethernet MAC, and silicon software TCP IPv4/v6 stack. The DS80C400 can be connected directly to IP networks and is a highly affordable solution for embedded networking needs according to the manufacturer. Operating at up to 75 MHz, the device provides ample speed to perform local control while also servicing network requests. In addition to the Ethernet MAC, the DS80C400 includes three synchronous/asynchronous serial ports that operate up to 18,75 Mbps, a CAN2.0B controller, up to eight ports (64 I/O pins), and a 1-Wire master.
Applications that require network connectivity such as MP3 audio players, web cameras, environmental controls, and industrial equipment can use the DS80C400's network interface for data collection, remote monitoring and control as well as remote application updates. The resident silicon software on the chip supports Internet standards such as TCP, UDP, IPv4/v6, IGMP, ICMP, TFTP, and DHCP. Applications can be executed from local memory or downloaded from the Internet for quick application updates.
A free download of the tiny Internet interface (TINI) runtime environment is available at www.maxim-ic.com/TINI. The DSTINIm400-144 verification module is also available for developers who want a proven implementation of the reference design for rapid evaluation and system integration. To streamline access to the network, application code can be written in Java or C.
A new era in modular I/O solutions Rugged Interconnect Technologies
Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.
Read more...High voltage instrument op-amp iCorp Technologies
Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.
Read more...High-speed SAR ADC simplifies design Altron Arrow
Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.
Read more...2-wire quad voltage output DAC Altron Arrow
Analogue, Mixed Signal, LSI
The DAC has a 2-wire serial interface that operates at clock rates up to 400 kHz, and this interface is SMBus compatible, allowing multiple devices to be placed on the same bus.
Read more...Dual-channel ADC for RF applications RFiber Solutions
Analogue, Mixed Signal, LSI
The ARF0471 from Advanced RF is a dual-channel, 14-bit, 3 GSPS ADC, which features an on-chip buffer and sample-and-hold circuit.
Read more...Infineon launches Edge Ai software solution Altron Arrow
Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.
Read more...16-bit voltage output denseDAC Altron Arrow
Analogue, Mixed Signal, LSI
The AD5766 uses a versatile four-wire serial interface that operates at clock rates of up to 50 MHz for write mode, and is compatible with SPI, QSPI, MICROWIRE, and DSP interface standards.
Read more...Programmable power and data acquisition modules CST Electronics
DSP, Micros & Memory
TapBus programmable power supply, metering and I/O modules include pre-implemented communication interfaces, automatic addressing, encryption, and configurable access control.
Read more...AFE enables the software-defined factory Avnet Silica
Analogue, Mixed Signal, LSI
With its software configurable analogue inputs, where each input can be configured for voltage, current, resistance, or temperature, NXP’s N-AFE enables a new level of flexibility.
printer friendly version