Electronics Technology


Small bridge rectifier for up to 250 V

20 November 2002 Electronics Technology

Diotec's MicroDIL MYS 40-250 series are claimed to be the smallest bridge rectifier in their class. Rated for currents 0,5 A and input voltage to 250 Veff, the MYS series has a case dimension of only 3 x 3 mm2. The device delivers a direct current output of up to 0,5 A (at 50°C) and peak crest currents to 6 A. Input voltage can vary from 40 to 250 V.

Packed in surface-mount housing the device is particularly suited for portable applications, where space and weight are critical parameters. Applications are in mobile telephones, plug-in power supply units and protective circuits for data lines.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

140 W USB-C PD reference design
Altron Arrow Electronics Technology
The design has a wide input range of 90 to 264 V AC, 50-60 Hz, and supports an output voltage range of 5 to 28 V (USB-PD 3.1 specification).

Read more...
SMD choke for currents up to 48 A
Electrocomp Passive Components
Designed for rated currents from 36 to 48 A, these surface-mountable components from TDK cover a range of inductance values from 2,3 to 8,5 µH.

Read more...
Advanced electrolytic hybrid capacitor
Electrocomp Passive Components
Online Teaser: The capacitor series from Panasonic achieves a maximum ripple current of 3,3 to 4,6 A, which is approximately 50% higher than comparable case sizes.

Read more...
Swing-out industrial wall-mount rack cabinet
Electrocomp Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing’s new industrial wall-mount rack cabinet offers dual access to equipment via the double hinge design.

Read more...
Antennas to meet all connectivity requirements
Electrocomp Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.

Read more...
Stainless steel pushbutton enclosures
Electrocomp Enclosures, Racks, Cabinets & Panel Products
he HYPB series from Hammond is a hygienic type 4X stainless steel pushbutton enclosure designed for use in environments where regular high temperature, high-pressure washdowns are required.

Read more...
SMD varistors with huge surge current capability
Electrocomp Power Electronics / Power Management
TDK Corporation has introduced two new varistor series in SMD design, the larger of the two capable of handling a surge current of 10 000 A.

Read more...
Sealed tantalum capacitors
Electrocomp Passive Components
With an operating temperature range of -55 to 125°C, with voltage derating, these capacitors have been designed especially for avionics and aerospace applications.

Read more...
Analogue front end for sensor measurements
Electrocomp Analogue, Mixed Signal, LSI
The NJU9103 AFE from Nisshinbo is a tiny analogue front end, with a 16-bit resolution ADC and up to 512 x signal amplification from the programmable gain amplifier.

Read more...
New series of chip-type capacitors
Electrocomp Passive Components
Panasonic Industries’ SMT capacitor series all benefit from the longest lifetime plus the lowest ESR values currently available.

Read more...