Circuit & System Protection


Transient voltage suppressors

14 May 2014 Circuit & System Protection

Brightking has released five new over-voltage transient voltage suppressors specifically designed to protect sensitive circuits against inductive load switching and load dump transients, occurring in the event of a discharged battery being disconnected while the alternator is generating charging current and with other loads remaining on the alternator circuit.

The ATH series caters for 12 V and 24 V systems, protecting against transients from 65 V to 87 V on 12 V supplies and 123 V to 174 V on 24 V supply lines.

For more information contact Willem Arnold, iCORP Group, +27 (0)11 781 2029, [email protected], www.icorpgroup.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

LTE Cat 1 bis communication
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The EG810M series is a series of LTE Cat 1 bis wireless communication modules specially designed by Quectel for M2M and IoT applications.

Read more...
Clearing the Static: Conductive foot, heel and shoe grounders
Actum Electronics Circuit & System Protection
Conductive foot, heel and shoe grounders are used in electrostatic discharge protected areas to provide a path to ground for static electricity.

Read more...
Smart module for multi-media devices
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Powered by a Qualcomm processor, Quectel’s new SC200V is designed to deliver exceptional performance across system capabilities, multimedia functions, and network connectivity.

Read more...
High voltage instrument op-amp
iCorp Technologies Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.

Read more...
LED driver for industrial power supply indication
Altron Arrow Editor's Choice Circuit & System Protection
A simple and small solution for driving an LED to provide visual feedback in the presence/absence of a system’s power using a chip not originally designed for this purpose.

Read more...
IoT/M2M-optimised LTE module
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The EG810M series is a series of LTE Cat 1 bis wireless communication modules specially designed by Quectel for M2M and IoT applications.

Read more...
Clearing the Static: Cleaning in an ESD-protected area
Actum Electronics Circuit & System Protection
Cleaning in a protected electrostatic discharge area is a critical task to maintain the integrity of sensitive electronic components and prevent damage caused by static electricity.

Read more...
Tiny power inductor for low noise applications
iCorp Technologies Passive Components
With the evolution of Bluetooth, chips, sensors and other technologies, the design of TWS earphones is becoming smaller and thinner, and the performance and size requirements of integrated inductors need to follow suit.

Read more...
Upgraded multiphase power inductor
iCorp Technologies Power Electronics / Power Management
The increased demand for computing power in data centres has resulted in the development of multi-phase ultra-low profile, ultra-high current copper magnetic co-fired power inductors.

Read more...
Wi-Fi 4 and Bluetooth LE 5.0 module
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The FGM840R has a built-in Cortex M33 and M23 dual-core processor and supports IEEE 802.11a/b/g/n protocol and BLE 5.0.

Read more...