Hittite has launched three logic devices which support 43–45 Gbps data transmission and clock rates up to 43 GHz. They have a wide range of applications and support many of the new and emerging optical, networking and storage area network (SAN) standards, including 100 GbE, 40G (D)QPSK and 100G DP-QPSK.
The HMC841LC4B is a D-type flip-flop that supports single-ended or differential operation and data transmission rates up to 43 Gbps. It operates with clock signals up to 43 GHz and the input is broadband from DC to 43 GHz. During normal operation, data is transferred to the outputs on the positive edge of the clock; reversing the clock inputs accommodates negative-edge triggered applications.
The HMC842LC4B is a 1:2 fanout buffer designed to support data transmission rates up to 45 Gbps and clock signals up to 28 GHz. The HMC843LC4B is easily configured to provide AND/NAND/OR/NOR functions supporting data transmission rates up to 45 Gbps and clock frequencies as high as 25 GHz.
The differential input and output signals of all three ICs are terminated with 50 Ω to ground on-chip and may be either AC or DC coupled.
X-band radar RF Design
Editor's Choice Telecoms, Datacoms, Wireless, IoT
X-band radar systems, particularly those leveraging beamforming ICs (BFICs), advanced gallium nitride (GaN) and gallium arsenide (GaAs) components, are leading the way in providing the high-performance radar capabilities required for modern defence and surveillance.
Read more...A new era in modular I/O solutions Rugged Interconnect Technologies
Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.
Read more...GNSS antenna redefining what’s possible RF Design
Telecoms, Datacoms, Wireless, IoT
u-blox has achieved what was once thought impossible with the launch of the DAN-F10N, the industry’s smallest and most reliable L1, L5 dual-band GNSS antenna module.
Read more...High voltage instrument op-amp iCorp Technologies
Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.
Read more...u-blox expands NORA-B2 BLE modules RF Design
Telecoms, Datacoms, Wireless, IoT
The new nRF54L chipset-based wireless modules reduce current consumption and double processing capacity, catering to diverse mass market segments.
Read more...New GNSS passive patch antenna RF Design
Telecoms, Datacoms, Wireless, IoT
The HP24510A from Taoglas is a stacked patch GNSS passive antenna that operates from 1215 to 1610 MHz covering the L1/L2 GNSS spectrum.
Read more...High-speed SAR ADC simplifies design Altron Arrow
Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.
Read more...6 – 18 GHz driver amplifier RF Design
Telecoms, Datacoms, Wireless, IoT
The QPA0022D from Qorvo is a high-performance driver amplifier covering a range of 6 to 18 GHz and fabricated on Qorvo’s production 0,15 µm pHEMT process.
Read more...2-wire quad voltage output DAC Altron Arrow
Analogue, Mixed Signal, LSI
The DAC has a 2-wire serial interface that operates at clock rates up to 400 kHz, and this interface is SMBus compatible, allowing multiple devices to be placed on the same bus.
Read more...Dual-channel ADC for RF applications RFiber Solutions
Analogue, Mixed Signal, LSI
The ARF0471 from Advanced RF is a dual-channel, 14-bit, 3 GSPS ADC, which features an on-chip buffer and sample-and-hold circuit.
printer friendly version