RFHIC has introduced two new gallium nitride (GaN) Doherty power amplifiers.
The RTP21005-11 is a 5 W device that provides 37 dBm of average output power from 2110–2170 MHz. With 40% efficiency, it is targeted at LTE remote radio head (RRH) solutions or outdoor small-cell backhaul equipment. It features 50 Ω input/output impedance and a built in output isolator.
The amplifier measures 100 x 50 x 20 mm and is 100% RF tested and thermal aged for immediate application. A 35 dB gain model is also available.
The second new device – the 80 W RTP18080-20 – provides 49 dBm of average output power from 1805 to 1880 MHz. It, too, has 40% efficiency and is suitable for LTE RRH solutions.
In addition to the same features as present in the RTP21005-11, the 162 x 125 x 18.8 mm RTP18080-20 has a built in monitoring circuit.
X-band radar RF Design
Editor's Choice Telecoms, Datacoms, Wireless, IoT
X-band radar systems, particularly those leveraging beamforming ICs (BFICs), advanced gallium nitride (GaN) and gallium arsenide (GaAs) components, are leading the way in providing the high-performance radar capabilities required for modern defence and surveillance.
Read more...A new era in modular I/O solutions Rugged Interconnect Technologies
Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.
Read more...GNSS antenna redefining what’s possible RF Design
Telecoms, Datacoms, Wireless, IoT
u-blox has achieved what was once thought impossible with the launch of the DAN-F10N, the industry’s smallest and most reliable L1, L5 dual-band GNSS antenna module.
Read more...High voltage instrument op-amp iCorp Technologies
Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.
Read more...u-blox expands NORA-B2 BLE modules RF Design
Telecoms, Datacoms, Wireless, IoT
The new nRF54L chipset-based wireless modules reduce current consumption and double processing capacity, catering to diverse mass market segments.
Read more...New GNSS passive patch antenna RF Design
Telecoms, Datacoms, Wireless, IoT
The HP24510A from Taoglas is a stacked patch GNSS passive antenna that operates from 1215 to 1610 MHz covering the L1/L2 GNSS spectrum.
Read more...High-speed SAR ADC simplifies design Altron Arrow
Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.
Read more...6 – 18 GHz driver amplifier RF Design
Telecoms, Datacoms, Wireless, IoT
The QPA0022D from Qorvo is a high-performance driver amplifier covering a range of 6 to 18 GHz and fabricated on Qorvo’s production 0,15 µm pHEMT process.
Read more...2-wire quad voltage output DAC Altron Arrow
Analogue, Mixed Signal, LSI
The DAC has a 2-wire serial interface that operates at clock rates up to 400 kHz, and this interface is SMBus compatible, allowing multiple devices to be placed on the same bus.
Read more...Dual-channel ADC for RF applications RFiber Solutions
Analogue, Mixed Signal, LSI
The ARF0471 from Advanced RF is a dual-channel, 14-bit, 3 GSPS ADC, which features an on-chip buffer and sample-and-hold circuit.
printer friendly version