Z-Communications has developed a new RoHS compliant voltage controlled oscillator for mobile communication system applications where low power consumption and small package size are critical.
The USSP2350-LF covers the frequency range of 2300 to 2400 MHz in 0,5 to 3,0 V of tuning voltage. It comes in a surface mount package measuring 5 x 5 x 1 mm while operating off 2,7 V and drawing only 6 mA, typically. The device provides a spectral purity of -82 dBc/Hz, typically, at 10 kHz from the carrier and is designed to operate over the commercial temperature range of -20°C to 70°C.
The VCO delivers 0 ±4 dBm of output power into a 50 Ω load and suppresses the 2nd harmonic to better than -13 dBc. The USSP2350-LF is not only designed to augment any mobile radio system specification due to its low power consumption, but can enhance a PLL design due to its 1,1:1 linearity over frequency and temperature.
The USSP2350-LF is available in tape and reel packaging for production requirements. It is also suitable for automated surface mount assembly and reflow.
X-band radar RF Design
Editor's Choice Telecoms, Datacoms, Wireless, IoT
X-band radar systems, particularly those leveraging beamforming ICs (BFICs), advanced gallium nitride (GaN) and gallium arsenide (GaAs) components, are leading the way in providing the high-performance radar capabilities required for modern defence and surveillance.
Read more...A new era in modular I/O solutions Rugged Interconnect Technologies
Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.
Read more...GNSS antenna redefining what’s possible RF Design
Telecoms, Datacoms, Wireless, IoT
u-blox has achieved what was once thought impossible with the launch of the DAN-F10N, the industry’s smallest and most reliable L1, L5 dual-band GNSS antenna module.
Read more...High voltage instrument op-amp iCorp Technologies
Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.
Read more...u-blox expands NORA-B2 BLE modules RF Design
Telecoms, Datacoms, Wireless, IoT
The new nRF54L chipset-based wireless modules reduce current consumption and double processing capacity, catering to diverse mass market segments.
Read more...New GNSS passive patch antenna RF Design
Telecoms, Datacoms, Wireless, IoT
The HP24510A from Taoglas is a stacked patch GNSS passive antenna that operates from 1215 to 1610 MHz covering the L1/L2 GNSS spectrum.
Read more...High-speed SAR ADC simplifies design Altron Arrow
Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.
Read more...6 – 18 GHz driver amplifier RF Design
Telecoms, Datacoms, Wireless, IoT
The QPA0022D from Qorvo is a high-performance driver amplifier covering a range of 6 to 18 GHz and fabricated on Qorvo’s production 0,15 µm pHEMT process.
Read more...2-wire quad voltage output DAC Altron Arrow
Analogue, Mixed Signal, LSI
The DAC has a 2-wire serial interface that operates at clock rates up to 400 kHz, and this interface is SMBus compatible, allowing multiple devices to be placed on the same bus.
Read more...Dual-channel ADC for RF applications RFiber Solutions
Analogue, Mixed Signal, LSI
The ARF0471 from Advanced RF is a dual-channel, 14-bit, 3 GSPS ADC, which features an on-chip buffer and sample-and-hold circuit.
printer friendly version