WL Gore & Associates’ GORE-SHIELD GS 500 is a non-military grade strip gasket which allows design engineers the opportunity to develop and prototype their own EMI gaskets with low fuss and cost. It also provides a solution to retrofitting problems and for field repairing damaged gaskets.
Available from stock in standard 15 metre rolls, the gasket material has a conductive, pressure sensitive adhesive. To ensure easy installation, joins or corners can be made by simply overlapping the strip or butting the ends together. The soft, conformable nature of GORE-SHIELD will allow any overlaps to compress down to the same cross section as the remainder of the gasket when a load is applied. The thickness of the strip can be increased, if required, by simply adding additional layers. Once the design is complete, custom die-cut shapes can be supplied from CAD files.
Strips cut to length can be supplied as user defined lengths of GORE-SHIELD, which are packaged either as loose pieces or on a continuous roll. The latter consists of individual pieces which can be conveniently peeled off and placed in position using the conductive pressure sensitive adhesive backing.
Clearing the Static: Understanding the significance of ESD audits Actum Electronics
Circuit & System Protection
An ESD (Electrostatic Discharge) audit is the first step in establishing an ESD plan, and it is important to include all areas where ESD-sensitive components are being handled.
Read more...Microchip introduces ECC608 TrustMANAGER Altron Arrow
Circuit & System Protection
To increase security on IoT products and facilitate easier setup and management, Microchip Technology has added the ECC608 TrustMANAGER with Kudelski IoT keySTREAM, Software as a Service (SaaS) to its Trust Platform portfolio of devices, services and tools.
Read more...Varistors for automotive applications Future Electronics
Circuit & System Protection
TDK Corporation has announced the addition of two new varistors to its AVRH series for automotive applications where both are characterised by the high electrostatic discharge-withstanding voltage demanded to ensure the safe operation of safety-critical automotive functions.
Read more...Single-phase EMC filters RS South Africa
Circuit & System Protection
TDK Corporation has expanded its portfolio of single-phase EMC filters for AC and DC applications up to 250 V and rated currents from 6 to 30 A.
Read more...Clearing the Static: ESD protective packaging Actum Group
Circuit & System Protection
The primary objective of ESD protective packaging is to prevent ESD incidents within the packaging and facilitate the dissipation of charges from the outer surface.
Read more...New NeoMesh protocol stack version CST Electronics
Circuit & System Protection
NeoCortec has released an updated NeoMesh protocol stack version 1.6 firmware for its NC2400 and NC1000 module series, which now supports the new Sensirion SHT4xA temperature and humidity sensor series.
Read more...NewFeed feeder protection relay NewElec Pretoria
Circuit & System Protection
The NewFeed Feeder Protection Relay has been designed to protect the connection between solar farms and conventional power grids in both low voltage (LV) and medium voltage (MV) distribution settings.
printer friendly version