DEHNpatch is an Ethernet patch cable supplied with surge protection in Cat. 6 performance for universal use according to EN 50173 up to 48 V d.c.
The DEHN product is installed and retrofitted into existing installations without extensive installation work – it is simply plugged in between the patch panel and active device (eg, switch) instead of using a conventional patch cable.
The DIN rail mountable supporting foot with snap-in device ensures safe earthing. For single applications, delivery includes a piece of DIN rail with a fixing device. For multiple applications in 19” distribution boards, the DEHNpatch mounting set should be used, which can be provided as an accessory part.
DEHNpatch is well suited for existing applications in offices and industry. Gigabit Ethernet, ATM or ISDN can be protected, as well as voice-over-IP and Power-over-Ethernet. Due to its fully shielded design, it can be used in shielded and unshielded networks. Its width corresponds approximately to an RJ45 socket; this allows the user to install up to 24 devices in one series and integrate them into a 19” rack. The standard total cable lengths of DEHNpatch are 3 m and 5 m (other lengths are available on request).
Clearing the Static: Understanding the significance of ESD audits Actum Electronics
Circuit & System Protection
An ESD (Electrostatic Discharge) audit is the first step in establishing an ESD plan, and it is important to include all areas where ESD-sensitive components are being handled.
Read more...Microchip introduces ECC608 TrustMANAGER Altron Arrow
Circuit & System Protection
To increase security on IoT products and facilitate easier setup and management, Microchip Technology has added the ECC608 TrustMANAGER with Kudelski IoT keySTREAM, Software as a Service (SaaS) to its Trust Platform portfolio of devices, services and tools.
Read more...Varistors for automotive applications Future Electronics
Circuit & System Protection
TDK Corporation has announced the addition of two new varistors to its AVRH series for automotive applications where both are characterised by the high electrostatic discharge-withstanding voltage demanded to ensure the safe operation of safety-critical automotive functions.
Read more...Single-phase EMC filters RS South Africa
Circuit & System Protection
TDK Corporation has expanded its portfolio of single-phase EMC filters for AC and DC applications up to 250 V and rated currents from 6 to 30 A.
Read more...Clearing the Static: ESD protective packaging Actum Group
Circuit & System Protection
The primary objective of ESD protective packaging is to prevent ESD incidents within the packaging and facilitate the dissipation of charges from the outer surface.
Read more...New NeoMesh protocol stack version CST Electronics
Circuit & System Protection
NeoCortec has released an updated NeoMesh protocol stack version 1.6 firmware for its NC2400 and NC1000 module series, which now supports the new Sensirion SHT4xA temperature and humidity sensor series.
Read more...NewFeed feeder protection relay NewElec Pretoria
Circuit & System Protection
The NewFeed Feeder Protection Relay has been designed to protect the connection between solar farms and conventional power grids in both low voltage (LV) and medium voltage (MV) distribution settings.