Analogue, Mixed Signal, LSI


76 V APD current monitor

28 April 2010 Analogue, Mixed Signal, LSI

Maxim’s new DS1842A is a 76 V APD (avalanche photo diode), bias-output-stage and current-monitoring IC. By employing Maxim’s state-of-the art CMOS process technology, the device integrates a high-voltage current source; several current mirrors for monitoring APD current; and a FET switch configured to work in conjunction with an external DC-DC controller to implement a boost DC-DC converter. The result is a fast settling time for GPON modules and a competitive cost in a small package. The DS1842A is suitable for providing bias to, and current monitoring for APDs in PON-OLT and PON-ONT equipment. It is fully specified over the -40°C to +85°C temperature range, and is available in a small 3 x 3 mm 14-pin TDFN with exposed pad.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Infineon launches Edge Ai software solution
Altron Arrow Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.

Read more...
16-bit voltage output denseDAC
Altron Arrow Analogue, Mixed Signal, LSI
The AD5766 uses a versatile four-wire serial interface that operates at clock rates of up to 50 MHz for write mode, and is compatible with SPI, QSPI, MICROWIRE, and DSP interface standards.

Read more...
Programmable power and data acquisition modules
CST Electronics DSP, Micros & Memory
TapBus programmable power supply, metering and I/O modules include pre-implemented communication interfaces, automatic addressing, encryption, and configurable access control.

Read more...
AFE enables the software-defined factory
Avnet Silica Analogue, Mixed Signal, LSI
With its software configurable analogue inputs, where each input can be configured for voltage, current, resistance, or temperature, NXP’s N-AFE enables a new level of flexibility.

Read more...
Easy monitoring of remote farm assets
CST Electronics Telecoms, Datacoms, Wireless, IoT
NeoCortec, providers of ultra-low-power bi-directional wireless mesh network hardware and software solutions, is working together with farmIT to enable easy monitoring of remote Australian farm assets.

Read more...
Managed gigabit PoE switch
CST Electronics Telecoms, Datacoms, Wireless, IoT
The SISPM1040-582-LRT from Lantronix is a managed PoE++ switch suitable for connecting and powering devices in hardened environments.

Read more...
High-performance GNSS module
CST Electronics Telecoms, Datacoms, Wireless, IoT
Simcom’s SIM66D-R can acquire and track any mix of multiple satellite signals, making it useful for determining position in mountainous and dense urban areas.

Read more...
Precision voltage reference
Altron Arrow Analogue, Mixed Signal, LSI
The ADR1001 is a fully integrated, ultra-low drift, buried Zener precision voltage reference solution in a single chip.

Read more...
Microphones enable low-power always-on state
Avnet Abacus Analogue, Mixed Signal, LSI
TDK Corporation has announced its InvenSense SmartSound T5848 I2S microphones to enable intelligent keyword, voice command, and sound detection at ultra-low power.

Read more...
Low power, low-noise amplifier
Altron Arrow Analogue, Mixed Signal, LSI
The ADL8141 is a low power consumption, low-noise amplifier that operates from 14 to 24 GHz, and draws a supply current of 25 mA from a 2 V supply.

Read more...