The MAX13042E and MAX13045E from Maxim are high-speed, 4-channel, bidirectional level translators with ±15 kV ESD protection on I/O Vcc lines. These devices provide the level shifting necessary for high-speed data transfer in multivoltage systems by operating with VL voltages from +1,62 V to +3,2 V and Vcc voltages from +2,2 V to +3,6 V. Over these operating-voltage ranges, the devices provide a guaranteed data rate of 100 Mbps with external push-pull or open-drain drivers that source as little as 4 mA output current. Offering low-voltage operation and ESD protection in a tiny, 1,54 mm x 2,12 mm UCSP, these level translators are ideal for high-speed data transfer between low-voltage ASICs/PLDs and higher voltage systems. Their compatibility with both push-pull and open-drain drivers is enabled by a pass-gate architecture and by the integration of internal current sources that are capable of sourcing 30 mA to pull up the I/O lines. The devices are fully specified over the extended temperature range of -40°C to +85°C, and are available in tiny, 3 mm x 3 mm, 14-pin TDFN and 1,54 mm x 2,12 mm, 12-bump UCSP packages.
A new era in modular I/O solutions Rugged Interconnect Technologies
Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.
Read more...High voltage instrument op-amp iCorp Technologies
Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.
Read more...High-speed SAR ADC simplifies design Altron Arrow
Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.
Read more...2-wire quad voltage output DAC Altron Arrow
Analogue, Mixed Signal, LSI
The DAC has a 2-wire serial interface that operates at clock rates up to 400 kHz, and this interface is SMBus compatible, allowing multiple devices to be placed on the same bus.
Read more...Dual-channel ADC for RF applications RFiber Solutions
Analogue, Mixed Signal, LSI
The ARF0471 from Advanced RF is a dual-channel, 14-bit, 3 GSPS ADC, which features an on-chip buffer and sample-and-hold circuit.
Read more...Infineon launches Edge Ai software solution Altron Arrow
Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.
Read more...16-bit voltage output denseDAC Altron Arrow
Analogue, Mixed Signal, LSI
The AD5766 uses a versatile four-wire serial interface that operates at clock rates of up to 50 MHz for write mode, and is compatible with SPI, QSPI, MICROWIRE, and DSP interface standards.
Read more...Programmable power and data acquisition modules CST Electronics
DSP, Micros & Memory
TapBus programmable power supply, metering and I/O modules include pre-implemented communication interfaces, automatic addressing, encryption, and configurable access control.
Read more...AFE enables the software-defined factory Avnet Silica
Analogue, Mixed Signal, LSI
With its software configurable analogue inputs, where each input can be configured for voltage, current, resistance, or temperature, NXP’s N-AFE enables a new level of flexibility.
printer friendly version