Analogue, Mixed Signal, LSI


Mic amp integrates AGC

30 May 2007 Analogue, Mixed Signal, LSI

Maxim's MAX9814 is a high-quality microphone amplifier with automatic gain control (AGC) and low-noise microphone bias. The integrated AGC circuitry allows the designer to define hold and release times, as well as the output threshold level. Optimising the signal level prior to digital signal processing ensures a low-noise signal that does not require further gain or attenuation. This high quality audio signal can be converted and processed in the digital domain without further losses, preserving quality. The device integrates a low-noise preamplifier, variable gain amplifier, output amplifier, and an internal low-noise microphone-bias-voltage generator that is capable of driving most electric condenser microphones. It comes in 1,5 x 2 mm,12-bump UCSP and 3 x 3 mm, 14-pin TDFN packages.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Infineon launches Edge Ai software solution
Altron Arrow Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.

Read more...
16-bit voltage output denseDAC
Altron Arrow Analogue, Mixed Signal, LSI
The AD5766 uses a versatile four-wire serial interface that operates at clock rates of up to 50 MHz for write mode, and is compatible with SPI, QSPI, MICROWIRE, and DSP interface standards.

Read more...
Programmable power and data acquisition modules
CST Electronics DSP, Micros & Memory
TapBus programmable power supply, metering and I/O modules include pre-implemented communication interfaces, automatic addressing, encryption, and configurable access control.

Read more...
AFE enables the software-defined factory
Avnet Silica Analogue, Mixed Signal, LSI
With its software configurable analogue inputs, where each input can be configured for voltage, current, resistance, or temperature, NXP’s N-AFE enables a new level of flexibility.

Read more...
Easy monitoring of remote farm assets
CST Electronics Telecoms, Datacoms, Wireless, IoT
NeoCortec, providers of ultra-low-power bi-directional wireless mesh network hardware and software solutions, is working together with farmIT to enable easy monitoring of remote Australian farm assets.

Read more...
Managed gigabit PoE switch
CST Electronics Telecoms, Datacoms, Wireless, IoT
The SISPM1040-582-LRT from Lantronix is a managed PoE++ switch suitable for connecting and powering devices in hardened environments.

Read more...
SMD choke for currents up to 48 A
Electrocomp Passive Components
Designed for rated currents from 36 to 48 A, these surface-mountable components from TDK cover a range of inductance values from 2,3 to 8,5 µH.

Read more...
Advanced electrolytic hybrid capacitor
Electrocomp Passive Components
Online Teaser: The capacitor series from Panasonic achieves a maximum ripple current of 3,3 to 4,6 A, which is approximately 50% higher than comparable case sizes.

Read more...
High-performance GNSS module
CST Electronics Telecoms, Datacoms, Wireless, IoT
Simcom’s SIM66D-R can acquire and track any mix of multiple satellite signals, making it useful for determining position in mountainous and dense urban areas.

Read more...
Precision voltage reference
Altron Arrow Analogue, Mixed Signal, LSI
The ADR1001 is a fully integrated, ultra-low drift, buried Zener precision voltage reference solution in a single chip.

Read more...