Maxim's new MAX5456/7 are claimed to be the industry's first dual, 32-tap, audio-taper digital potentiometers that feature a debounced, simple pushbutton interface for volume and balance control. These devices do not require an external microcontroller, GPIO, or any debounce circuitry for the control interface. An integrated algorithm separately controls volume and balance. The MAX5456/7 are available with a 3- or 4-wire pushbutton interface that features Maxim's proprietary SmartWiper rapid-advance wiper-control system. Without needing a microcontroller, SmartWiper advances the wiper at a rate of 4 Hz when the switch is closed for one second, and 16 Hz when the switch is closed for four seconds. The ICs also feature a mute function and each potentiometer includes integrated suppression circuitry that ensures 'clickless' switching between wiper transitions. Available in a 4 x 4 mm TQFN package, they contain two 10 kΩ resistor strings that offer ratiometric and end-to-end temperature coefficients of 5 ppm/°C and 35 ppm/°C, respectively. They operate from a 2,7 to 5,25 V single supply and draw less than 0,5 μA in standby.
Infineon launches Edge Ai software solution Altron Arrow
Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.
Read more...16-bit voltage output denseDAC Altron Arrow
Analogue, Mixed Signal, LSI
The AD5766 uses a versatile four-wire serial interface that operates at clock rates of up to 50 MHz for write mode, and is compatible with SPI, QSPI, MICROWIRE, and DSP interface standards.
Read more...Programmable power and data acquisition modules CST Electronics
DSP, Micros & Memory
TapBus programmable power supply, metering and I/O modules include pre-implemented communication interfaces, automatic addressing, encryption, and configurable access control.
Read more...AFE enables the software-defined factory Avnet Silica
Analogue, Mixed Signal, LSI
With its software configurable analogue inputs, where each input can be configured for voltage, current, resistance, or temperature, NXP’s N-AFE enables a new level of flexibility.
Read more...Easy monitoring of remote farm assets CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec, providers of ultra-low-power bi-directional wireless mesh network hardware and software solutions, is working together with farmIT to enable easy monitoring of remote Australian farm assets.
Read more...Managed gigabit PoE switch CST Electronics
Telecoms, Datacoms, Wireless, IoT
The SISPM1040-582-LRT from Lantronix is a managed PoE++ switch suitable for connecting and powering devices in hardened environments.
Read more...High-performance GNSS module CST Electronics
Telecoms, Datacoms, Wireless, IoT
Simcom’s SIM66D-R can acquire and track any mix of multiple satellite signals, making it useful for determining position in mountainous and dense urban areas.
Read more...Precision voltage reference Altron Arrow
Analogue, Mixed Signal, LSI
The ADR1001 is a fully integrated, ultra-low drift, buried Zener precision voltage reference solution in a single chip.
Read more...Microphones enable low-power always-on state Avnet Abacus
Analogue, Mixed Signal, LSI
TDK Corporation has announced its InvenSense SmartSound T5848 I2S microphones to enable intelligent keyword, voice command, and sound detection at ultra-low power.
Read more...Low power, low-noise amplifier Altron Arrow
Analogue, Mixed Signal, LSI
The ADL8141 is a low power consumption, low-noise amplifier that operates from 14 to 24 GHz, and draws a supply current of 25 mA from a 2 V supply.
printer friendly version