Epcos developed a new type of ceramic capacitor to minimise the risk of short circuits if the capacitor is damaged. The product is suitable for applications in which the capacitor is permanently connected to a positive pole without extra safety measures. Flexural rupture of conventional capacitors may lead to contact between opposite polarity electrodes with the resulting dangers of local overheating or a fire. The affected module then fails and the battery is discharged at the same time.
Connected in series, the MLSC (multilayer serial ceramic capacitor) significantly reduces such risks, says Epcos. Also, no extra safety measures are required, so that existing designs and layouts can be retained. The internal structure of the new component is based on two series-connected capacitors. Even if one of these should fail due to a short circuit, no short circuit occurs in the overall component.
The new series B37941X capacitors are available in size 0805 and ceramic material X7R. 100 V types cover the capacitance range from 1 to 100 nF, while 50 V types cover 33 to 100 nF.
140 W USB-C PD reference design Altron Arrow
Electronics Technology
The design has a wide input range of 90 to 264 V AC, 50-60 Hz, and supports an output voltage range of 5 to 28 V (USB-PD 3.1 specification).
Read more...SMD choke for currents up to 48 A Electrocomp
Passive Components
Designed for rated currents from 36 to 48 A, these surface-mountable components from TDK cover a range of inductance values from 2,3 to 8,5 µH.
Read more...Advanced electrolytic hybrid capacitor Electrocomp
Passive Components
Online Teaser: The capacitor series from Panasonic achieves a maximum ripple current of 3,3 to 4,6 A, which is approximately 50% higher than comparable case sizes.
Read more...Swing-out industrial wall-mount rack cabinet Electrocomp
Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing’s new industrial wall-mount rack cabinet offers dual access to equipment via the double hinge design.
Read more...Antennas to meet all connectivity requirements Electrocomp
Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.
Read more...Stainless steel pushbutton enclosures Electrocomp
Enclosures, Racks, Cabinets & Panel Products
he HYPB series from Hammond is a hygienic type 4X stainless steel pushbutton enclosure designed for use in environments where regular high temperature, high-pressure washdowns are required.
Read more...SMD varistors with huge surge current capability Electrocomp
Power Electronics / Power Management
TDK Corporation has introduced two new varistor series in SMD design, the larger of the two capable of handling a surge current of 10 000 A.
Read more...Sealed tantalum capacitors Electrocomp
Passive Components
With an operating temperature range of -55 to 125°C, with voltage derating, these capacitors have been designed especially for avionics and aerospace applications.
Read more...Analogue front end for sensor measurements Electrocomp
Analogue, Mixed Signal, LSI
The NJU9103 AFE from Nisshinbo is a tiny analogue front end, with a 16-bit resolution ADC and up to 512 x signal amplification from the programmable gain amplifier.
Read more...New series of chip-type capacitors Electrocomp
Passive Components
Panasonic Industries’ SMT capacitor series all benefit from the longest lifetime plus the lowest ESR values currently available.
printer friendly version