Dallas Semiconductor's DS2413 chip is a dual-channel, programmable GPIO that protects against possible power fault conditions in end applications. All device pins can withstand sustained levels up to 28 V. Two DS2413 ports can independently operate as input or output at levels as high as 28 V d.c.
In addition, the open-drain outputs can each sink 20 mA, making them ideal for LED control. The DS2413 includes a unique 64-bit ID number which, combined with the I/O features, provides a solution for accessory and peripheral control and identification. The 64-bit value can also be customised to encode model information for the accessory or end product.
Device operation, including communication, control, and power, is performed over the two-contact 1-wire interface, enabling line lengths between a host system and slave devices that can extend tens of meters with hundreds of multidropped 1-wire devices.
The DS2413 GPIO operates from 2,8 V to 5,25 V over a 0 to +70°C and is available in 6-pin TSOC packaging.
Infineon launches Edge Ai software solution Altron Arrow
Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.
Read more...16-bit voltage output denseDAC Altron Arrow
Analogue, Mixed Signal, LSI
The AD5766 uses a versatile four-wire serial interface that operates at clock rates of up to 50 MHz for write mode, and is compatible with SPI, QSPI, MICROWIRE, and DSP interface standards.
Read more...Programmable power and data acquisition modules CST Electronics
DSP, Micros & Memory
TapBus programmable power supply, metering and I/O modules include pre-implemented communication interfaces, automatic addressing, encryption, and configurable access control.
Read more...AFE enables the software-defined factory Avnet Silica
Analogue, Mixed Signal, LSI
With its software configurable analogue inputs, where each input can be configured for voltage, current, resistance, or temperature, NXP’s N-AFE enables a new level of flexibility.
Read more...Easy monitoring of remote farm assets CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec, providers of ultra-low-power bi-directional wireless mesh network hardware and software solutions, is working together with farmIT to enable easy monitoring of remote Australian farm assets.
Read more...Managed gigabit PoE switch CST Electronics
Telecoms, Datacoms, Wireless, IoT
The SISPM1040-582-LRT from Lantronix is a managed PoE++ switch suitable for connecting and powering devices in hardened environments.
Read more...SMD choke for currents up to 48 A Electrocomp
Passive Components
Designed for rated currents from 36 to 48 A, these surface-mountable components from TDK cover a range of inductance values from 2,3 to 8,5 µH.
Read more...Advanced electrolytic hybrid capacitor Electrocomp
Passive Components
Online Teaser: The capacitor series from Panasonic achieves a maximum ripple current of 3,3 to 4,6 A, which is approximately 50% higher than comparable case sizes.
Read more...High-performance GNSS module CST Electronics
Telecoms, Datacoms, Wireless, IoT
Simcom’s SIM66D-R can acquire and track any mix of multiple satellite signals, making it useful for determining position in mountainous and dense urban areas.
Read more...Precision voltage reference Altron Arrow
Analogue, Mixed Signal, LSI
The ADR1001 is a fully integrated, ultra-low drift, buried Zener precision voltage reference solution in a single chip.
printer friendly version