Electronics Technology


Low power operation plus near-gigahertz speed for SBC

19 November 2003 Electronics Technology

Ampro Computers' Little Board 700 single board computer (SBC) addresses the needs of demanding and power-sensitive embedded aplications.

The Little Board 700 is a full-featured embedded computer, using the industry-standard EBX form factor, and is available with a choice of Intel processors: the low voltage Intel Pentium III processor with 512 KB cache at 933 MHz, the Intel Celeron processor at 650 MHz, or the Celeron processor at 400 MHz.

Ampro says that this development means that system OEMs who require 5- to 10-year product availability, extended temperature to +85°C, and/or conformal coating for their rugged application can finally migrate to a high-performance single board computer without having to compromise the thermal design of their system. Details of this can be seen at www.ampro.com/html/LittleBoard_700.html.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

140 W USB-C PD reference design
Altron Arrow Electronics Technology
The design has a wide input range of 90 to 264 V AC, 50-60 Hz, and supports an output voltage range of 5 to 28 V (USB-PD 3.1 specification).

Read more...
Cast Study: In-flight entertainment uses custom switch from Diamond Systems
Electronic Products Design Computer/Embedded Technology
By using our EPSILON compact Ethernet switch module and a custom baseboard, Diamond was able to deliver a quick-turn, compact, economical, and rugged custom switch for this new on-board entertainment and internet service system.

Read more...
Nanometre-precision piezo actuators
RS South Africa Electronics Technology
TDK Corporation has announced two new piezo actuators that are characterised by a wide dynamic range, a high force-to-volume ratio, but with precision in the nanometre range.

Read more...
Webinar: The evolving electrification of the power distribution system
Infineon Technologies Electronics Technology
New connected car functionality, along with the necessity to reduce the cost, weight and complexity associated with wire harnesses, has led to the transformation of the power distribution system in automotive engineering.

Read more...
Improved MnZn material for power conversion industry
Sivan Electronic Supplies Electronics Technology
Cosmo Ferrites Ltd, a leading manufacturer of soft ferrites, has launched an improved version of CF295 for the power conversion industry.

Read more...
Common mode filter for automotive Ethernet
Avnet Abacus Electronics Technology
TDK Corporation has announced the introduction of its new ACT1210E Series common mode filter for automotive Ethernet 10BASE-T1S.

Read more...
Energising the industrial edge
Electronics Technology
As if the drive to decarbonise energy as part of sustainability and climate change efforts was not enough, the recent rise in energy prices has brought into sharp contrast the need to re-examine how we generate, distribute, and consume electricity.

Read more...
Samsung begins chip production using 3 nm process technology
EBV Electrolink Electronics Technology
The optimised 3 nm process with GAA architecture achieves 45% lower power usage, 23% improved performance and 16% smaller surface area compared to 5 nm process.

Read more...
Panasonic releases its updated touch-sensitive knob
Altron Arrow Electronics Technology
Panasonic, in conjunction with Microchip, has launched an update to its existing Magic Knob, a capacitive knob ready for standard touch sensors for use in controlling automotive information displays.

Read more...
Microchip’s new IC to replace Hall effect position sensors
Altron Arrow Electronics Technology
The LX34070 IC from Microchip is set to help accelerate the global move away from expensive and less accurate magnet-based solutions for safety-critical EV motor position monitoring.

Read more...