Passive Components


Resistors boost working voltages

22 October 2003 Passive Components Surveillance

Design engineers working on high-voltage power applications requiring high pulse load capability in a compact body size can now benefit from a new resistor with a working voltage of 3,5 kV.

TT Electronics Welwyn Components is offering the MH series of UL-approved flameproof resistors that gives an extensive resistance range of 100 kΩ to 1 MΩ at 1% tolerance and a TCR of 100 ppm/°C. Complying with BS EN60065, the metal film resistors are ideally suited to high-voltage power supplies, motor speed control for domestic appliances, barrier resistors in tele-visions and capacitor bleed resistors.

The MH series is available in two standard sizes with limiting element voltages of 1,6 and 3,5 kV with corresponding power ratings from 0,25 to 0,5 W at 70°C ambient. They are rated for operation from -55 to +155°C.

For further information contact Leslie Govender, Arrow Altech Distribution, 011 923 9600, lgovender@arrow.altech.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Ryzen-based computer on module
Altron Arrow AI & ML
SolidRun announced the launch of its new Ryzen V3000 CX7 Com module, configurable with the eight-core/16-thread Ryzen Embedded V3C48 processor.

Read more...
3,75 GHz RF inductor
RF Design Passive Components
The ceramic chip wire wound inductor from Coilcraft features a DC resistance of 1 O, a DC current of 175 mA, and a self-resonant frequency of 3,75 GHz.

Read more...
Robust and customisable SBC
Altron Arrow DSP, Micros & Memory
Pairing the powerful i.MX8M Plus System on Module (SoM) from SolidRun, which features the i.MX 8M Plus SoC from NXP, this high-performance SBC is set to transform industrial environments.

Read more...
New family supports future cryptography
Altron Arrow DSP, Micros & Memory
NXP has introduced its new i.MX 94 family, which contains an i.MX MPU with an integrated time-sensitive networking (TSN) switch, enabling configurable, secure communications with rich protocol support in industrial and automotive environments.

Read more...
NXP’s all-purpose microcontroller series
Altron Arrow DSP, Micros & Memory
NXP has released its MCX A14x and A15x series of all-purpose microcontrollers which are part of the larger MCX portfolio that shares a common Arm Cortex-M33 core platform.

Read more...
Non-terrestrial network module
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Fibocom unveiled its MA510-GL (NTN), a non-terrestrial networks module which is compliant with 3GPP Release 17 standard.

Read more...
Cellular IoT connectivity via satellite
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The Telit Cinterion cellular LPWA module will enable satellite data communication using the NB-IoT protocol, without any special hardware changes required for the integration of the cellular module in the customer application.

Read more...
Low noise 3-axis MEMS accelerometers
Altron Arrow DSP, Micros & Memory
The ADXL357 and ADXL357B from Analog Devices are digital outputs, low noise density, low 0 g offset drift, low power, three-axis accelerometers with selectable measurement ranges.

Read more...
Upgraded power inductor series
iCorp Technologies Passive Components
Sunlord’s multiphase co-fired power inductor HTF-MP series has upgraded the single-phase HTF-H products in terms of integrated applications.

Read more...
Infineon launches Edge Ai software solution
Altron Arrow Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.

Read more...