Electronics Technology


World's smallest 1-Gbit DDR SDRAMs

10 September 2003 Electronics Technology

Infineon Technologies has shipped first samples of its 1-Gbit double data rate (DDR) SDRAM to selected key customers. The devices are fabricated using Infineon's advanced 110 nm CMOS process. At only 160 mm2 chip size they are claimed to be the industry's smallest 1-Gbit DDR SDRAMs to date. The new DRAM is packaged in a standard 400 mil, 66 pin thin small outline package (TSOP) or a 68 ball fine-pitch ball grid array (FBGA) for space-constrained applications. Supported organisations are x4, x8 and x16. The 1-Gbit double data rate SDRAM covers the whole range of popular DDR data rates from DDR266 through DDR400 operating at 133 MHz through 200 MHz clock speeds, respectively. The 1-Gbit DDR SDRAM will be primarily used to offer high-density registered and unbuffered modules for the high-end server and workstation market. Target products are registered dual-inline memory modules (DIMMs) of 4-Gbyte and 2-Gbyte density as well as unbuffered DIMMs of 2-Gbyte density.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

140 W USB-C PD reference design
Altron Arrow Electronics Technology
The design has a wide input range of 90 to 264 V AC, 50-60 Hz, and supports an output voltage range of 5 to 28 V (USB-PD 3.1 specification).

Read more...
SMD choke for currents up to 48 A
Electrocomp Passive Components
Designed for rated currents from 36 to 48 A, these surface-mountable components from TDK cover a range of inductance values from 2,3 to 8,5 µH.

Read more...
Advanced electrolytic hybrid capacitor
Electrocomp Passive Components
Online Teaser: The capacitor series from Panasonic achieves a maximum ripple current of 3,3 to 4,6 A, which is approximately 50% higher than comparable case sizes.

Read more...
Swing-out industrial wall-mount rack cabinet
Electrocomp Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing’s new industrial wall-mount rack cabinet offers dual access to equipment via the double hinge design.

Read more...
Antennas to meet all connectivity requirements
Electrocomp Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.

Read more...
Stainless steel pushbutton enclosures
Electrocomp Enclosures, Racks, Cabinets & Panel Products
he HYPB series from Hammond is a hygienic type 4X stainless steel pushbutton enclosure designed for use in environments where regular high temperature, high-pressure washdowns are required.

Read more...
SMD varistors with huge surge current capability
Electrocomp Power Electronics / Power Management
TDK Corporation has introduced two new varistor series in SMD design, the larger of the two capable of handling a surge current of 10 000 A.

Read more...
Sealed tantalum capacitors
Electrocomp Passive Components
With an operating temperature range of -55 to 125°C, with voltage derating, these capacitors have been designed especially for avionics and aerospace applications.

Read more...
Analogue front end for sensor measurements
Electrocomp Analogue, Mixed Signal, LSI
The NJU9103 AFE from Nisshinbo is a tiny analogue front end, with a 16-bit resolution ADC and up to 512 x signal amplification from the programmable gain amplifier.

Read more...
New series of chip-type capacitors
Electrocomp Passive Components
Panasonic Industries’ SMT capacitor series all benefit from the longest lifetime plus the lowest ESR values currently available.

Read more...