Dual D-A converters

19 November 2014 Analogue, Mixed Signal, LSI

Analog Devices introduced a 2,8 GSps dual 16-bit converter for telecommunications system manufacturers that require microwave frequencies in point-to-point wireless backhaul equipment. The 16-bit AD9136 and 11-bit AD9135 dual D-A converters achieve exceptional signal bandwidth while enabling designers to support emerging E-band (71 - 76 GHz and 81 - 86 GHz) frequencies being adopted by wireless carriers to support steadily increasing demand for high-speed mobile voice and data transfers.

The devices support complex input data rates of up to 2,12 GSps per D-A converter using a flexible, 8-lane, 10,6 Gbps JESD204B interface. They achieve better than -80 dBc spurious-free dynamic range (SFDR) and have exceptional noise performance of -163 dBm/Hz that provide high quality synthesis of wideband signals.

The AD9136/5 converters require only 1,4 W of power under full operating conditions and integrate a low-noise PLL (phase-locked loop), which lowers bill of materials costs and simplifies system design by eliminating the need for a high-performance source clock. The ICs also include integrated interpolation filters with selectable interpolation factors of 1, 2, 4 and 8.

In a point-to-point radio system design, the AD9136/5 are optimised to interface seamlessly with Analog Devices’ ADRF672x analog quadrature modulators.

For more information contact Arnold Perumal, Avnet Kopp, +27 (0)11 319 8600, [email protected], www.avnet.co.za

Further reading:

Infineon launches Edge Ai software solution
Altron Arrow Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.

Read more...

---

16-bit voltage output denseDAC
Altron Arrow Analogue, Mixed Signal, LSI
The AD5766 uses a versatile four-wire serial interface that operates at clock rates of up to 50 MHz for write mode, and is compatible with SPI, QSPI, MICROWIRE, and DSP interface standards.

Read more...

---

AFE enables the software-defined factory
Avnet Silica Analogue, Mixed Signal, LSI
With its software configurable analogue inputs, where each input can be configured for voltage, current, resistance, or temperature, NXP’s N-AFE enables a new level of flexibility.

Read more...

---

Precision voltage reference
Altron Arrow Analogue, Mixed Signal, LSI
The ADR1001 is a fully integrated, ultra-low drift, buried Zener precision voltage reference solution in a single chip.

Read more...

---

Microphones enable low-power always-on state
Avnet Abacus Analogue, Mixed Signal, LSI
TDK Corporation has announced its InvenSense SmartSound T5848 I2S microphones to enable intelligent keyword, voice command, and sound detection at ultra-low power.

Read more...

---

Low power, low-noise amplifier
Altron Arrow Analogue, Mixed Signal, LSI
The ADL8141 is a low power consumption, low-noise amplifier that operates from 14 to 24 GHz, and draws a supply current of 25 mA from a 2 V supply.

Read more...

---

QLC Flash memory with the latest BiCS technology
EBV Electrolink Analogue, Mixed Signal, LSI
KIOXIA has implemented the groundbreaking CBA (CMOS directly Bonded to Array) technology, which enables the creation of higher density devices and an industry-leading interface speed of 3,6nbsp;Gbps.

Read more...

---

Precision op-amp
Altron Arrow Analogue, Mixed Signal, LSI
The ADA4099-1 and ADA4099-2 are single/dual robust, precision, rail-to-rail input/output operational amplifiers with inputs that operate from -VS to +VS and beyond, which is referred to as Over-The-Top.

Read more...

---

Using linear regulators as a filter
Altron Arrow Editor's Choice Analogue, Mixed Signal, LSI
Different circuits can be used to filter a supply voltage, and this article explains the main differences between using an LC filter and a linear regulator for filtering.

Read more...

---

High-speed PIN diode
Altron Arrow Analogue, Mixed Signal, LSI
Vishay’s new high-speed Silicon PIN diode is able to detect both visible and near infra-red radiation over a wide spectrum range from 350 to 1100 nm.

Read more...

---