Following the launch of RECOM’s 90W step-shape module in 36 mm the REFIN2U-S90/24/CL,
RECOM is extending its REFIN family with the new REFIN2U-S30. The latest addition brings the same 2U-width, step-shape DIN rail concept at reduced cost to lower power applications and addresses space-constrained flat-panel distribution boards, particularly in home and building automation systems. The REFIN2U-S30 is available with nominal 12 V DC and 24 V DC outputs and delivers 30 W continuous power. The units operate from a wide 85 – 305 V AC input range and offer output adjustment ranges of 10,8 to 13,2 V DC and 21,6 to 26,4 V DC respectively.Typical efficiency reaches up to 90%, while no-load power consumption is below 100 mW.
With a width of just 36 mm and overall dimensions of 36 x 94 x 55 mm, the new series is intended for installations where distribution space is limited. The parts use spring-loaded push-in terminals for solid or stranded wires, enabling tool-less connection without ferrules. Rear mounting flaps also allow direct back-panel installation in any orientation, even without a DIN rail. The REFIN2U-S30 is specified for 30W output from -40°C to +55°C globally and can operate up to +90°C ambient with derating. Protection functions include short-circuit, over-current and over-voltage protection with hiccup mode and auto-recovery. Reinforced insulation provides 4 kV AC isolation from input to output, while the converters are rated for OVC III operation up to 3000 m altitude and OVC II up to 5000 m.
For system integration, the new parts comply with EN IEC 61204-3 Class B and EN55032 Class B EMC requirements and are certified to UL62368-1, CAN/CSA-C22.2 No. 62368-1-19, IEC62368-1 and EN IEC 62368-1. The products are also classified as LPS limited power sources.
Harnessing Leakage Inductance Würth Electronics South Africa
Passive Components
Würth Electronics has expanded its WE-MCRI product series with the new 1090HL variant (HL = High Leakage), a coupled inductor specifically designed to improve the performance of SEPIC, ZETA and Cuk converters.
Read more...Space saving SMD common-mode chokes Electrocomp
Passive Components
TDK Corporation presents the EP21 series of flat-wire double chokes designed for common-mode EMI filtering and available in an SMD format with dimensions of only 23,8 x 17,7 mm and heights ranging from 21,6 to 22,3 mm
Read more...Highly rugged GAPS and HAPS proximity sensors IOT Electronics
Passive Components
Now available through Powell Electronics are the GAPS (General Aerospace Proximity Sensors) and HAPS (Harsh Application Proximity Sensors) proximity sensors from Honeywell.
Read more...Understanding EMI Filters and their applications Vepac Electronics
Passive Components
Electromagnetic Interference (EMI) Filters are essential for maintaining electromagnetic compatibility (EMC), allowing multiple devices to function together without interference.
Read more...SMT flat-wire inductor
Passive Components
Würth Elektronik introduces its new WE-SFIA series of flat-wire inductors in 2010, 2013, and 2016 packages.
Read more...Compact SSI family for industrial automation Altron Arrow
Passive Components
Infineon Technologies has introduced the ISSI20BxxF Solid State Isolator (SSI) family, bringing solid-state isolation technology into high-volume applications traditionally served by photovoltaic isolators (PVIs), photovoltaic relays (PVRs), and electromechanical relays (EMRs).
Read more...SGMICRO expands analogue IC portfolio iCorp Technologies
Passive Components Telecoms, Datacoms, Wireless, IoT
SGMICRO continues to add to its analogue IC portfolio at a steady pace, with new devices released across power protection, power conversion, current sensing and RF signal-chain categories.
Read more...Nanocrystalline cores for cable assembly Würth Electronics South Africa
Passive Components
Conventional MnZn and NiZn ferrite cores for cable assembly are now complemented by nanocrystalline cable cores.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version