Test & Measurement


True-RMS clamp meter measures 2500 A

30 April 2025 Test & Measurement

The Fluke 376 FC True-RMS Clamp Meter with iFlex is the most advanced troubleshooting tool for industrial and commercial electricians. The 376 FC is part of the Fluke Connect family of wireless test tools that enables you to log, trend and monitor measurements while remaining safely away from the arc flash zone through Bluetooth connectivity.

The 376 FC clamp meter uses an integrated low-pass filter to accurately measure non-linear signals such as adjustable speed drives, electronic ballasts and other non-linear loads. The clamp also uses proprietary inrush measurement technology to filter out noise and captures the motor starting current exactly as the circuit protection sees it.

The meter measures:

• Voltage to 1000 V AC or DC.

• Resistance to 60 kΩ.

• Minimum, maximum, average, and inrush current.

• 1000 µF capacitance.

The 376 FC clamp carries a CAT III 1000 V, CAT IV 600 V safety rating, designed to offer the highest possible protection in a test tool.

The included 18-inch or 36-inch iFlex flexible current probe provides easier access to large conductors in tight spaces. The flexible probe expands the measurement range to 2500 A AC and allows frequency measurement to 500 Hz.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Analyser and voltmeter capability added to portable instruments
Tamashi Technology Investments Test & Measurement
Anritsu Company had added Vector Network Analyzer and Vector Voltmeter measurements to their industry standard Site Master instruments.

Read more...
Marktech’s latest LEDs and photodiodes
NuVision Electronics Test & Measurement
Designed for precision sensing and emission tasks, Marktech’s optoelectronic lineup serves medical, industrial, aerospace, and environmental markets.

Read more...
MEMS air quality sensor
Future Electronics Test & Measurement
Bosch Sensortec’s BME690 is the latest-generation gas sensor that combines advanced monitoring capabilities with innovative artificial intelligence functionality.

Read more...
Telemetry retrofit for sustainable resource management
CST Electronics Test & Measurement
AquaMeter is a cost-effective secure telemetry retrofit that can easily be added to hundreds of millions of legacy mechanical water meters.

Read more...
Latest wireless barcode scanner
Brady Corporation Test & Measurement
Brady has launched its new barcode scanner, the CR2100, which is a wireless handheld scanner utilising Bluetooth 5 LE for communication with a host device.

Read more...
hybridNETBOX instrumentation platform
Vepac Electronics Test & Measurement
The hybridNETBOX from Spectrum Instrumentation is an innovative instrumentation platform that combines a multi-channel arbitrary waveform generator (AWG) and a digitiser in a single portable unit.

Read more...
14-bit AWG at 20 GS/s
Vepac Electronics Test & Measurement
The Arb Rider AWG-7000 is the world’s fastest 14-bit Arbitrary Waveform Generator, featuring a 20 GS/s real time update rate and 14-bit vertical resolution.

Read more...
Additions to APD5000 series oscilloscopes
Osiris Technical Systems Test & Measurement
Each unit is equipped with an integrated CAT II digital multimeter, three programmable power supplies, a dedicated trigger line, and an arbitrary waveform generator.

Read more...
Handheld RTSA up to 9,5 GHz
Vepac Electronics Test & Measurement
The PXE-90 implements an FFT engine on the built-in FPGA and support frame compression with trace detection while ensuring no missing samples between FFT frames.

Read more...
Comtest Group celebrates 20 years!
Comtest News
The Comtest Group is proudly celebrating 20 years of successful trading in the southern African test and measurement, communications, equipment, solutions, and specialised systems markets.

Read more...