Power Electronics / Power Management


140 W reference board design for USB-C chargers

31 May 2023 Power Electronics / Power Management

The reference board REF_XDPS2221_140W1 by Infineon was developed for USB-PD applications with a wide input range, and output voltage from 5 to 28 V. The nominal output power of this design is 140 W.

It features the industry’s first PFC + hybrid flyback combo controller XDP digital power XDPS2221, CoolGaN 600 V GIT HEMTs (IGLD60R190D1) as the main switch, and on the secondary side the BSC040N10NS5 OptiMOS 5 N-channel MOSFET serving as the SR switch. The P-channel HEXFET power MOSFET IRF7240 is the safety switch, and the EZ-PD CCG3PA was implemented for PD control.

The board has a dimension of 109,5 x 38,5 x 24 mm, a power density of 22,67 W/in3, and a 5 V standby input power below 75 mW.

Two-layer PCBs are used for the whole system, which results in a low system cost.

The reference design can be accessed by visiting http://bitly.ws/Dfkg


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Altron celebrates 60th birthday with a call to rebuild Johannesburg
Altron Arrow News
Altron is celebrating its 60th birthday by honouring Johannesburg’s heritage and encouraging business, government and civil society to come together and respond to our President’s call to rebuild Johannesburg.

Read more...
Reference board for cardio monitoring
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The STDES-ESP01 reference board from STMicroelectronics demonstrates the capability of the ST1VAFE6AX and ST1VAFE3BX biosensors to detect ECG and SCG signals.

Read more...
Power efficiency and robustness in electronics design
Power Electronics / Power Management
Mouser Electronics recently announced a new eBook in collaboration with Analog Devices highlighting essential strategies for optimising power systems.

Read more...
USB Type-C-powered controllers
Future Electronics Power Electronics / Power Management
Diodes Incorporated has released two USB Type-C PD 3.1 extended power range sink controllers that can be embedded into battery-powered devices.

Read more...
ST MCUs extend ultra-low power innovation
Altron Arrow DSP, Micros & Memory
STMicroelectronics has introduced new STM32U3 microcontrollers with cutting-edge power-saving innovations that ease deployment of smart connected tech, especially in remote locations.

Read more...
Multicell battery monitoring
Altron Arrow Power Electronics / Power Management
The LTC6811 from Analog Devices is a multicell battery stack monitor that measures up to 12 series connected battery cells with a total measurement error of less than 1,2 mV.

Read more...
Innovative satellite navigation receiver
Altron Arrow Telecoms, Datacoms, Wireless, IoT
STMicroelectronics has released an innovative satellite navigation receiver to democratise precise positioning for automotive and industrial applications.

Read more...
LED driver for industrial power supply indication
Altron Arrow Editor's Choice Circuit & System Protection
A simple and small solution for driving an LED to provide visual feedback in the presence/absence of a system’s power using a chip not originally designed for this purpose.

Read more...
Full telemetry in tiny DC-DC converters
RS South Africa Power Electronics / Power Management
The FS160* series of µPOL DC-DC converters from TDK all offer full telemetry, provide increased performance, and are remarkable for extraordinary power density in the smallest sizes.

Read more...
Power IC supplies 1650 W
EBV Electrolink Power Electronics / Power Management
Power Integrations has announced a two-fold increase in power output from the HiperLCS-2 chipset with the new device now being able to deliver up to 1650 W of continuous output power.

Read more...