With a current output of 10 A, the GYSFLASH 10.36/48 PL is a multi-voltage charger designed to recharge batteries of 36 V and 48 V found on many recreational vehicles such as electric bicycles, trolleys, golf carts, forklifts or stationary devices like uninterrupted power supplies (UPSs). The charger is designed to charge lead-acid batteries (Gel, AGM or Liquid), lithium-iron phosphate (LiFePO4) and standard lithium-ion batteries such as NMC, NCA, Li-Po, LCO or MCO.
In 48 V lithium charging mode, it is possible to choose between 58,0 V and 54,0 V charging voltages depending on the number of cells in series in the battery. The charger also incorporates an optimised charge maintenance cycle which allows the charger to safely remain connected to the battery indefinitely once the charging cycle is complete.
The charger also has an automatic restart function which allows the charger to memorise the current settings and, in the event of a power failure, will restart automatically using these saved settings.
Batteries that have been deeply discharged and have a measured voltage as low as 5 V are also able to be charged using the GYSFLASH 10.36/48 PL.
The 100% automatic charge cycle measures ambient temperature and the charging parameters are then able to be adjusted based on this temperature. This extends the life and performance of batteries with lead, lithium and lithium-ion chemistries.
The charger has comprehensive protection built in including against short-circuits, polarity reversal and overloading. The 10.36/48 PL also incorporates a spark prevention system and will automatically enter standby mode if the battery is disconnecting during the charging cycle.
The compact design of the charger makes it light and portable and able to be easily mounted to a wall. It is supplied with a two-core cable with an integrated quick release connector.
hybridNETBOX instrumentation platform Vepac Electronics
Test & Measurement
The hybridNETBOX from Spectrum Instrumentation is an innovative instrumentation platform that combines a multi-channel arbitrary waveform generator (AWG) and a digitiser in a single portable unit.
Read more...USB Type-C-powered controllers Future Electronics
Power Electronics / Power Management
Diodes Incorporated has released two USB Type-C PD 3.1 extended power range sink controllers that can be embedded into battery-powered devices.
Read more...14-bit AWG at 20 GS/s Vepac Electronics
Test & Measurement
The Arb Rider AWG-7000 is the world’s fastest 14-bit Arbitrary Waveform Generator, featuring a 20 GS/s real time update rate and 14-bit vertical resolution.
Read more...Multicell battery monitoring Altron Arrow
Power Electronics / Power Management
The LTC6811 from Analog Devices is a multicell battery stack monitor that measures up to 12 series connected battery cells with a total measurement error of less than 1,2 mV.
Read more...Full telemetry in tiny DC-DC converters RS South Africa
Power Electronics / Power Management
The FS160* series of µPOL DC-DC converters from TDK all offer full telemetry, provide increased performance, and are remarkable for extraordinary power density in the smallest sizes.
Read more...Power IC supplies 1650 W EBV Electrolink
Power Electronics / Power Management
Power Integrations has announced a two-fold increase in power output from the HiperLCS-2 chipset with the new device now being able to deliver up to 1650 W of continuous output power.
Read more...High-voltage step-down DC-DC converter Altron Arrow
Power Electronics / Power Management
The MAX17793 is a high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated MOSFETs operating over an input voltage range of 3 to 80 V.
Read more...Handheld RTSA up to 9,5 GHz Vepac Electronics
Test & Measurement
The PXE-90 implements an FFT engine on the built-in FPGA and support frame compression with trace detection while ensuring no missing samples between FFT frames.
Read more...High-voltage contactors RS South Africa
Power Electronics / Power Management
TDK Corporation has announced two new additions to its high-voltage contactor portfolio for harsh environments: the HVC43MC with integrated mirror contact and the HVC45 with enhanced short-circuit current handling capability.
printer friendly version