Analogue, Mixed Signal, LSI


Rad-hard DAC for next-gen satellites

26 April 2022 Analogue, Mixed Signal, LSI

The STMicroelectronics RHRDAC121 radiation-hardened digital-to-analog converter (DAC) operates down to 2,5 V for use in modern, low-power system designs that older 3,3 V parts cannot support.

Consuming just 0,6 mW at its maximum speed and supply voltage, the 12-bit, 1 Msps successive-approximation register (SAR) DAC helps reduce size, weight and power (SWaP) in next-generation satellites. Typically used in circuits for telemetry, housekeeping and precision sensor-gain adjustment, its features include an SPI-compatible serial output, internal voltage reference and automatic power-on-reset to zero-volt output.

Maintaining stable performance parameters in harsh conditions up to 100 krad total ionising dose (TID), the RHRDAC121 is single-event latch-up (SEL)-free up to 125 MeV.cm2/mg. It is characterised for single-event transients (SET) and single-event upsets (SEU) and ready for immediate deployment with no further up-screening required.

The RHRDAC121 is QML-V qualified and comes in an hermetic ceramic package with gold- or solder-dipped leads. It is also available as a bare die.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Reference board for cardio monitoring
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The STDES-ESP01 reference board from STMicroelectronics demonstrates the capability of the ST1VAFE6AX and ST1VAFE3BX biosensors to detect ECG and SCG signals.

Read more...
ST MCUs extend ultra-low power innovation
Altron Arrow DSP, Micros & Memory
STMicroelectronics has introduced new STM32U3 microcontrollers with cutting-edge power-saving innovations that ease deployment of smart connected tech, especially in remote locations.

Read more...
Multicell battery monitoring
Altron Arrow Power Electronics / Power Management
The LTC6811 from Analog Devices is a multicell battery stack monitor that measures up to 12 series connected battery cells with a total measurement error of less than 1,2 mV.

Read more...
A new era in modular I/O solutions
Rugged Interconnect Technologies Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.

Read more...
High voltage instrument op-amp
iCorp Technologies Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.

Read more...
Innovative satellite navigation receiver
Altron Arrow Telecoms, Datacoms, Wireless, IoT
STMicroelectronics has released an innovative satellite navigation receiver to democratise precise positioning for automotive and industrial applications.

Read more...
LED driver for industrial power supply indication
Altron Arrow Editor's Choice Circuit & System Protection
A simple and small solution for driving an LED to provide visual feedback in the presence/absence of a system’s power using a chip not originally designed for this purpose.

Read more...
High-voltage step-down DC-DC converter
Altron Arrow Power Electronics / Power Management
The MAX17793 is a high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated MOSFETs operating over an input voltage range of 3 to 80 V.

Read more...
High-speed SAR ADC simplifies design
Altron Arrow Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.

Read more...
Arduino platform with Analog Devices technology for flexible industrial control
Altron Arrow Editor's Choice DSP, Micros & Memory
Software-configurable systems enable industrial OEMs to deliver unprecedented flexibility to the factory floor, while simplifying product complexity.

Read more...