News


Research out of Finland explores more eco-friendly electronics

24 November 2021 News

The amount of electronics will inevitably continue to increase and the use of raw materials in the sector is expected to double by 2050. The amount of electronic waste has also almost doubled over the past 16 years and only 20% of this waste is collected efficiently. The EU has therefore called for more sustainable solutions from the electronics industry and VTT (Technical Research Centre of Finland) is developing them by combining printed electronics, bio-based materials and ecodesign thinking.

The environmental load of the electronics industry can be significantly reduced by moving from traditional manufacturing processes to printed electronics and from fossil-based materials to bio-based materials. By using printing processes, up to 90% of fossil materials can be replaced in some applications. At the same time, energy consumption may decrease to one fifth compared to traditional processes. Ecodesign, on the other hand, promotes the efficient use, recycling and recovery of valuable materials.

VTT has versatile expertise in all these areas and can provide extensive knowledge in both electronics manufacturing and new environmentally-friendly materials. In the ECOtronics project funded by Business Finland, this expertise has been combined to assess the environmental load of electronics and to develop sustainable solutions and determine their feasibility.

“The environmental impact of electronics is caused by, among other things, the used raw materials and manufacturing processes and the use, recycling and post-treatment of products. The environmental load must be examined on a case-by-case basis throughout the life cycle of the product so that the right route to reduce it may be found,” says Liisa Hakola, the leader of the ECOtronics project at VTT.

Solutions tested in demo cases

VTT and university partners have tested the feasibility of new sustainable solutions through demo cases. The subject of one demo was a smart label printed on bio-based plastic, which is powered by a supercapacitor rechargeable with solar panels, even indoors. The label can be added as a part of the product packaging and can be used to monitor, for example, the transport conditions of food and medicines or other heat-sensitive products. The solution is also suitable for monitoring different spaces and among other things, for monitoring moisture, pressure or damage sustained by products. Another demo case concerned a biodegradable antenna connected to a circuit board, which is suitable in wireless transfer of measurement data, for example.

One of the advantages of bio-based materials is that their properties can be modified in many ways. This enables completely new applications. “For example, a smart label is light, thin and flexible. It is suitable for, among other things, wearable electronics for which traditional heavy, thick and rigid circuit boards are not suitable. We will continue to explore these opportunities,” says Maria Smolander, research team leader at VTT.

Sustainable electronics for business needs

VTT helps companies in the electronics industry find new solutions for sustainable electronics. Eight companies interested in sustainable electronics participated in the ECOtronics project. For example, the package industry operator Iscent received help in material selection and testing and the health technology developer GE Healthcare in ecodesign and environmental impact assessment.

“We wanted to explore and test new bio-based materials and we found new alternatives, one of which was perfectly suited to our customer. This helped us to sign a significant contract,” says Raimo Korhonen, partner and project manager, Iscent Oy.

GE Healthcare wanted to investigate the environmental impact of its new pulse oximeter, which is a cordless device placed on a patient's finger. “We compared the environmental load of our product concept with the alternatives available on the market and examined possible benefits and problem areas in terms of environmental impact. The significance of the environmental load was also assessed by comparing it with examples from everyday life, such as one litre of milk. In this comparison, the product concept's performance was excellent,” says Juha Virtanen, hardware project leader, GE Healthcare.

In addition to Iscent and GE Healthcare, the Finnish companies New Cable Corporation, Paptic, Green Company Effect, Stora Enso, Vaisala and Confidex participated in the ECOtronics project. VTT's research partners are Tampere University, LUT University and LAB University of Applied Sciences.

More information about the ECOtronics project can be found at www.ecotronics.fi




Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Technical resource centre for smart cities
News
Mouser’s infrastructure and smart cities content hub features comprehensive articles, blogs, eBooks, and products from Mouser’s technical team and trusted manufacturing partners.

Read more...
UFS Flash named Best in Show
EBV Electrolink News
KIOXIA Europe GmbH was named as winner in the Memory & Storage category of the Embedded Computing Design (ECD) electronica Best in Show Awards at the recently held electronica 2024.

Read more...
Save the date for Securex South Africa 2025
News
Home to Africa’s largest collection of security solutions, Securex South Africa returns to Gallagher Convention Centre in Midrand from 3 to 5 June 2025.

Read more...
Trina Storage ranked in top 10
News
Amidst the global energy storage market, Trina Storage has once again earned recognition from authoritative institutions with its outstanding innovation capabilities and global layout.

Read more...
2025 outlook for DRAM is poor
News
According to TrendForce, weak demand outlook and rising inventory and supply forecast to pressure DRAM prices down for 2025.

Read more...
Price hike to challenge energy reforms
News
Eskom’s proposed 44% price hike could undermine renewable energy gains despite tech innovation.

Read more...
IO Ninja debugging tool
RF Design News
Tibbo has released a major update to IO Ninja, its versatile communications debugging tool for Windows, Linux, and macOS.

Read more...
Young SA robotics team takes world title
News
In a demonstration of innovation and teamwork, Texpand, a South African youth robotics team based in Cape Town, recently made history by winning the 2024 FIRST Tech Challenge (FTC) World Championships.

Read more...
From the editor's desk: A brave new world
Technews Publishing News
The technology Tesla currently uses in its cars from the batteries, power electronics, controllers, through to the mechanics, gearboxes, and the AI inference computer and software have are incorporated in the development of Optimus, allowing the development of the robot to gain impressive features in a relatively short time span.

Read more...
Seven Labs partnership enhances local electronics distribution
Seven Labs Technology News
Aimed at revolutionising the electronics distribution landscape in South Africa, Seven Labs has announced a partnership with LCSC, one of China’s most reputable electronics distributors.

Read more...