With a tiny footprint of only 10 x 10 mm, Sensirion’s LPG10-1000 liquid flow sensor provides optimal performance and speed in measuring liquid flow in a planar microfluidic glass substrate, with down-mount fluidic ports for highly compact integration into any fluidic manifold system. It is thus ideal for high-volume applications with strict space limitations.
Two core technologies are combined to produce the sensor: microfluidics chips and digital microsensor chips. This approach enables measurement of liquid flow inside a cost-efficient planar glass substrate. The digital microsensor chip provides the full signal processing functionality for a fully calibrated, temperature compensated and linearised digital output.
The LPG10-1000 is a smart sensor solution offering flow rates from the low microlitre per minute range up to 1 ml/min. The fact that glass is the only wetted material ensures optimum compatibility with biological and pharmaceutical processes.
Due to its small thermal mass, response times below 30 ms can be reached. This means that even highly dynamic changes in the flow rate (e.g. produced by pulsating micropumps) can be monitored with this sensor. Furthermore, the sensor’s signal can be used for closed-loop control to reach continuous flows even with pulsating pump mechanisms.
The small form factor literally allows direct and highly accurate measurements of the flow at any point of interest in a fluidic system. In addition, real-time detection of failures such as clogging, air bubbles or leaks is possible.
Infineon launches Edge Ai software solution Altron Arrow
Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.
Read more...16-bit voltage output denseDAC Altron Arrow
Analogue, Mixed Signal, LSI
The AD5766 uses a versatile four-wire serial interface that operates at clock rates of up to 50 MHz for write mode, and is compatible with SPI, QSPI, MICROWIRE, and DSP interface standards.
Read more...AFE enables the software-defined factory Avnet Silica
Analogue, Mixed Signal, LSI
With its software configurable analogue inputs, where each input can be configured for voltage, current, resistance, or temperature, NXP’s N-AFE enables a new level of flexibility.
Read more...SMD choke for currents up to 48 A Electrocomp
Passive Components
Designed for rated currents from 36 to 48 A, these surface-mountable components from TDK cover a range of inductance values from 2,3 to 8,5 µH.
Read more...Advanced electrolytic hybrid capacitor Electrocomp
Passive Components
Online Teaser: The capacitor series from Panasonic achieves a maximum ripple current of 3,3 to 4,6 A, which is approximately 50% higher than comparable case sizes.
Read more...Precision voltage reference Altron Arrow
Analogue, Mixed Signal, LSI
The ADR1001 is a fully integrated, ultra-low drift, buried Zener precision voltage reference solution in a single chip.
Read more...Microphones enable low-power always-on state Avnet Abacus
Analogue, Mixed Signal, LSI
TDK Corporation has announced its InvenSense SmartSound T5848 I2S microphones to enable intelligent keyword, voice command, and sound detection at ultra-low power.
Read more...Low power, low-noise amplifier Altron Arrow
Analogue, Mixed Signal, LSI
The ADL8141 is a low power consumption, low-noise amplifier that operates from 14 to 24 GHz, and draws a supply current of 25 mA from a 2 V supply.
Read more...QLC Flash memory with the latest BiCS technology EBV Electrolink
Analogue, Mixed Signal, LSI
KIOXIA has implemented the groundbreaking CBA (CMOS directly Bonded to Array) technology, which enables the creation of higher density devices and an industry-leading interface speed of 3,6nbsp;Gbps.
Read more...Swing-out industrial wall-mount rack cabinet Electrocomp
Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing’s new industrial wall-mount rack cabinet offers dual access to equipment via the double hinge design.
printer friendly version