XP Glassman’s OQ Series of high-voltage AC/DC power supplies are sophisticated 8 kW or 16 kW open-stack units with extremely low ripple and noise. The air-insulated, fast-response supplies exhibit tight regulation across a range of models available with output voltage ranges from 0-200 kV d.c. up to 0-500 kV d.c. One master supply and up to four slave supplies can be run in parallel, providing a maximum of 25 to 40 kW depending on the maximum DC voltage.
OQ Series power supplies consist of a rack-style driver chassis, a high-voltage stack assembly and a remote control unit. The dimensions of the stack vary with the output voltage rating and are given in the specifications in the datasheet. The driver chassis is provided in a cabinet with 275,8 mm height x 501,7 mm width x 636,5 mm depth. The remote control unit measures 132,5 mm height x 482,6 mm width x 186,3 mm depth.
The units use air as the primary dielectric medium – no oil or encapsulation is used which would impede serviceability or increase weight. Internal circuitry constantly senses and integrates arcs that occur over a given time. In the event that a system or load arcing problem develops and exceeds factory-set parameters, the power supply will cycle off in an attempt to clear the fault and then automatically restart after a preset ‘off dwell time’. The OQ Series’ high-voltage output is inhibited for a short period after each load arc to help extinguish the arc.
Typically, ripple is less than 0,1% peak-to-peak of rated voltage at full load. Off-the-line pulse width modulation (PWM) provides high efficiency and a reduced parts count for improved reliability. The OQ Series’ standard operation mode is constant voltage/current. Automatic crossover from constant-voltage to constant-current regulation provides protection against overloads, arcs and short circuits. A current-trip feature may be substituted for constant-current operation by a remote controlled selector switch on the rear panel of the chassis.
Standard accessories for the OQ Series include 7,6 m of detachable interconnect cables, null modem cable and USB cable.
Zero drift current shunt monitors Altron Arrow
Power Electronics / Power Management
The NCS21671 and NCV21671 from onsemi are a series of voltage output current sense amplifiers offered in gains of 25, 50, 100, and 200 V/V.
Read more...Schneider Electric partners with Drakenstein Municipality Schneider Electric South Africa
Power Electronics / Power Management
Drakenstein Municipality, situated in Paarl in the Western Cape, is one of the first distribution utilities globally to implement Schneider Electric’s green, SF6-free RM AirSeT switchgear with pure air technology and native digital connectivity.
Read more...E-Mobility: navigate safety, interoperability and conformance Concilium Technologies
Power Electronics / Power Management
Although the concept of electric vehicles is not a new one, the market remains in its infancy, and is not well-regulated or fully operational. This presents a number of challenges for manufacturers throughout the EV and EVSE ecosystem.
Read more...Webinar: Decarbonise with industrial drives
Power Electronics / Power Management
Infineon's TRENCHSTOP IGBT7 and CoolSiC technologies increase the efficiency of your industrial drive design, ultimately resulting in cost savings for you, and a more sustainable future for all.
Read more...Analysis of switch-mode power supply: inductor violations Altron Arrow
Editor's Choice Power Electronics / Power Management
Common switch-mode power supply (SMPS) design errors are discussed, and their appropriate rectification is specified, with details on complications that arise with the power stage design of DC-DC switching regulators.
Read more...High-speed AWG generates up to 20 sine waves Vepac Electronics
Test & Measurement
Spectrum Instrumentation has released a new firmware option for its range of versatile 16-bit Arbitrary Waveform Generators, with sampling rates up to 1,25 GS/s and bandwidths up to 400 MHz.
Read more...Compact PCB-mount SMPS RS South Africa
Power Electronics / Power Management
Traco Power’s 5W PCB-mount switch mode power supply (SMPS) offers high efficiency, and is well suited for a variety of applications in the automation, electronics, electrical and mechanical industries.
Read more...AC-DC brick PSU Conical Technologies
Power Electronics / Power Management
These PSUs have a typical efficiency of up to 92%, and a power factor value of up to 0,99. They are available in 12, 24, 28, 48 and 54 V output versions.
Read more...5 kW switching PSU range Conical Technologies
Power Electronics / Power Management
Mornsun has released a new switching power supply range, the LMF5000-25Bxx, which has a 5000 W capacity, and features universal AC input configurations.
Read more...Reliable charging range Current Automation
Power Electronics / Power Management
Whether you’re powering essential electronics, keeping emergency equipment operational, or maintaining the performance of critical machinery, the need for dependable charging solutions cannot be overstated.
printer friendly version