Power Electronics / Power Management


Isolated dual-channel gate driver

29 September 2021 Power Electronics / Power Management

onsemi’s NCP51561 is an isolated dual-channel gate driver with 4,5 A and 9 A source and sink peak current respectively. Designed for fast switching to drive power MOSFETs and SiC MOSFET power switches, the device offers short and matched propagation delays.

Two independent 5 kVrms internal galvanic isolation barriers from each input to the corresponding output, and internal functional isolation between the two output drivers, allow a working voltage of up to 1500 V d.c. This driver can be used in any possible configuration of two low-side, two high-side switches or a half-bridge driver with programmable dead time.

An ENA/DIS pin shuts down both outputs simultaneously when set low or high for ENABLE or DISABLE mode respectively. The NCP51561 offers other important protection functions such as independent under-voltage lockout for both gate drivers and a dead time adjustment function.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Artificial intelligence meets embedded development
Avnet Silica DSP, Micros & Memory
Microchip Technology is leveraging the power of artificial intelligence (AI) to assist software developers and embedded engineers in writing and debugging code with the launch of its MPLAB AI Coding Assistant.

Read more...
Power efficiency and robustness in electronics design
Power Electronics / Power Management
Mouser Electronics recently announced a new eBook in collaboration with Analog Devices highlighting essential strategies for optimising power systems.

Read more...
USB Type-C-powered controllers
Future Electronics Power Electronics / Power Management
Diodes Incorporated has released two USB Type-C PD 3.1 extended power range sink controllers that can be embedded into battery-powered devices.

Read more...
Multicell battery monitoring
Altron Arrow Power Electronics / Power Management
The LTC6811 from Analog Devices is a multicell battery stack monitor that measures up to 12 series connected battery cells with a total measurement error of less than 1,2 mV.

Read more...
Full telemetry in tiny DC-DC converters
RS South Africa Power Electronics / Power Management
The FS160* series of µPOL DC-DC converters from TDK all offer full telemetry, provide increased performance, and are remarkable for extraordinary power density in the smallest sizes.

Read more...
Power IC supplies 1650 W
EBV Electrolink Power Electronics / Power Management
Power Integrations has announced a two-fold increase in power output from the HiperLCS-2 chipset with the new device now being able to deliver up to 1650 W of continuous output power.

Read more...
Microprocessors with advanced graphics and connectivity
Avnet Silica DSP, Micros & Memory
Microchip’s SAMA7D65 MPU runs a 1 GHz Arm Cortex-A7 core and integrates MIPI DSI, LVDS display interfaces and 2D GPU for HMI applications.

Read more...
High-voltage step-down DC-DC converter
Altron Arrow Power Electronics / Power Management
The MAX17793 is a high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated MOSFETs operating over an input voltage range of 3 to 80 V.

Read more...
High-voltage contactors
RS South Africa Power Electronics / Power Management
TDK Corporation has announced two new additions to its high-voltage contactor portfolio for harsh environments: the HVC43MC with integrated mirror contact and the HVC45 with enhanced short-circuit current handling capability.

Read more...
Chokes rated at 36 A
RS South Africa Power Electronics / Power Management
TDK Corporation has launched the EPCOS SurfIND series, a new range of current-compensated ring core double chokes for high currents and surface mounting.

Read more...