Opto-Electronics


Miniature yellow and blue OLED display

29 July 2020 Opto-Electronics

Raystar’s REA012864M is a COG (chip-on-glass) 0,96-inch dual colour OLED in the form of a PCB module. The module is built on an SSD1306 IC, supporting an I2C interface, 1/64 driving duty cycle, and supply voltage for 5 V logic (3,3 V optional). It has a PCB outline size of 27,3 x 27,3 mm with mounting holes on the board and 4x1 metal pins on the module.

The standard colour is yellow/sky blue only, without any other colour options.

The REA012864M is suitable for smart home application, medical devices, smart controls, meters, etc. This module can operate at temperatures from -40℃ to +80℃.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

LTE Cat 1 bis communication
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The EG810M series is a series of LTE Cat 1 bis wireless communication modules specially designed by Quectel for M2M and IoT applications.

Read more...
Smart module for multi-media devices
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Powered by a Qualcomm processor, Quectel’s new SC200V is designed to deliver exceptional performance across system capabilities, multimedia functions, and network connectivity.

Read more...
High voltage instrument op-amp
iCorp Technologies Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.

Read more...
Easy Nixie tube display
Dizzy Enterprises Opto-Electronics
MIKROE has launched Nixie Power Click, a booster Click board designed to provide high voltage for powering Nixie Tube (cold cathode display) shields.

Read more...
IoT/M2M-optimised LTE module
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The EG810M series is a series of LTE Cat 1 bis wireless communication modules specially designed by Quectel for M2M and IoT applications.

Read more...
Tiny power inductor for low noise applications
iCorp Technologies Passive Components
With the evolution of Bluetooth, chips, sensors and other technologies, the design of TWS earphones is becoming smaller and thinner, and the performance and size requirements of integrated inductors need to follow suit.

Read more...
Upgraded multiphase power inductor
iCorp Technologies Power Electronics / Power Management
The increased demand for computing power in data centres has resulted in the development of multi-phase ultra-low profile, ultra-high current copper magnetic co-fired power inductors.

Read more...
Wi-Fi 4 and Bluetooth LE 5.0 module
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The FGM840R has a built-in Cortex M33 and M23 dual-core processor and supports IEEE 802.11a/b/g/n protocol and BLE 5.0.

Read more...
ESP32-C6 achieves Thread 1.4 certification
iCorp Technologies DSP, Micros & Memory
The ESP32-C6 has achieved Thread 1.4 Interoperability Certification, offering secure commissioning, advanced diagnostics, enhanced internet connectivity with Thread over Infrastructure, and optimised energy-efficient device roles.

Read more...
LTE Cat 1 and Cat 1 bis continue to drive cellular IoT connection growth
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
LTE or 4G are now well-established as the go-to cellular technology for IoT but there is an enormous middle ground for LTE Cat 1 to serve, along with Cat 4 and other variants.

Read more...