To meet the requirements of OEMs designing machines for packaging, mechanical handling, food processing and other applications, Omron developed a class of panel meter that builds in a higher degree of functionality and intelligence, but without the cost penalty and complexity of a full specification PID controller.
Compact and intelligent, the K3GN is a 1/32 DIN, 'smart' digital panel meter offering features such as scalable inputs and RS485 communications. Designed to cover a wide range of applications, it is suited for use as a process meter (using its DC voltage/current input), or as an RPM meter/tachometer (using its frequency input), to accuracy of ±0,1% of full scale value.
The K3GN accepts a range of industry-standard analogue inputs, including 4-20 mA, 0-20 mA, 1-5 V d.c., 0-5 V d.c., ±5 V d.c. and ±10 V d.c., whilst the input frequency range is from zero to 5 kHz. For increased versatility, the displayed values can be scaled to convert input signals into desired physical values.
There is a choice of outputs, including two relay outputs, three NPN transistor outputs or three PNP transistor outputs, all of which can be supplied with or without the RS485 communications option. In addition each output can be configured independently to act as a high limit, low limit or both high and low limit output.
A key feature of the K3GN is the ease with which it can be configured either from the front panel, or remotely from a PC via the RS485 interface using Omron's free temperature controller and panel meter programming software, SYS-Config.
The 5-digit display is a high visibility design, using a high contrast, backlit LCD, easy to view at almost any angle. The display colour can be set to red or green as preferred and can also be set to change colour when an alarm state is reached.
For use in arduous areas, the front panel is sealed to NEMA4X/IP66. The K3GN is CE marked for conformity with all relevant EN/IEC standards, and is UL/CSA approved.
For more information contact Steve Green, Yelland Control, 011 455 2782, [email protected]
Generate waveforms at 10 GS/s Vepac Electronics
Computer/Embedded Technology
New flagship arbitrary waveform generator cards from Spectrum Instrumentation generate waveforms with 2,5 GHz bandwidth and 16-bit vertical resolution.
Read more...Quad-port 10GBASE-T controller Rugged Interconnect Technologies
Computer/Embedded Technology
he SN4-DJEMBE, available from Rugged Interconnect, is a networking adaptor card for CompactPCI Serial systems, equipped with four individual controllers for 10GBASE-T.
Read more...HPE policy management platform
Computer/Embedded Technology
Duxbury Networking has announced the availability of the HPE Aruba ClearPass policy management platform, that enables business and personal devices to connect to an organisational level, in compliance with corporate security policies.
Read more...IoT gateways Brandwagon Distribution
Computer/Embedded Technology
IoT Gateways are hardware and software devices that are responsible for collecting data from connected devices, managing communication between devices and the cloud, and processing and analysing the data before sending it to the cloud for further analysis.
Read more...1.6T Ethernet IP solution to drive AI and hyperscale data centre chips
Computer/Embedded Technology
As artificial intelligence (AI) workloads continue to grow exponentially, and hyperscale data centres become the backbone of our digital infrastructure, the need for faster and more efficient communication technologies becomes imperative. 1.6T Ethernet will rapidly be replacing 400G and 800G Ethernet as the backbone of hyperscale data centres.
Read more...Keeping it cool within the edge data centre
Computer/Embedded Technology
The creation of more data brings with it the corresponding need for more compute power and more data centres, which, in turn, can create unique challenges with regards to securing the environment and cooling the IT loads.
Read more...NEX XON becomes Fortinet partner NEC XON
Computer/Embedded Technology
This designation demonstrates NEC XON’s ability to expertly deploy, operate, and maintain its own end-to-end security solutions, helping organisations to achieve digital acceleration.
Read more...Online tool for data centre planning and design
Computer/Embedded Technology
Vertiv has unveiled a new tool, Vertiv Modular Designer Lite, designed to transform and simplify the configuration of prefabricated modular (PFM) data centres.
Read more...Mission computer for HADES Rugged Interconnect Technologies
Computer/Embedded Technology
North Atlantic Industries’ latest product, the SIU34S, has been selected as the mission computer for the High Accuracy Detection and Exploitation System (HADES) program.
Read more...14th Gen power to boost AI at the edge Rugged Interconnect Technologies
Computer/Embedded Technology
ADLINK’s inclusion of Intel’s 14th generation Core processors into its latest embedded boards and fanless computers is set to boost the AI and graphics capabilities.
printer friendly version