Passive intermodulation (PIM) is one of the main causes of faults in modern networks. PIM can significantly reduce the network quality with regard to range and data transmission. PIM is caused by a number of factors, some of which include inadequate installation, poor component quality, or site-specific elements.
The Rosenberger portable and multifunctional, broadband PIM Site Analyzer is an alternative way to perform accurate, stressed PIM tests on site. By detecting and eliminating interferences, higher data rates, shorter response times and increased network quality can be realised.
The instrument consists of a single master unit with band-specific and interchangeable filter units. No calibration is required when interchanging filters on site. It offers easy plug-and-play setup and covers a frequency range of 700 to 2700 MHz. Its continuous wave (CW) signal simulates real operating conditions of the base station (in conformity with IEC 62037-1). The analyser upholds accuracy of down to 0,3 m for PIM Distance to Fault (DTF) measurement.
60 MHz 16-bit AWG Vepac Electronics
Test & Measurement
Siglent’s SDG1000X Plus series function/arbitrary waveform generator offers a maximum output frequency of 60 MHz, 16-bit vertical resolution, 1 GSa/s sampling rate, and 8 Mpts arbitrary waveform length.
Read more...AC programmable power Accutronics
Test & Measurement
TDK Corporation has announced the introduction of the TDK-Lambda brand GENESYS AC and GENESYS AC PRO series of 2 kVA and 3 kVA rated programmable AC power sources.
Read more...Digital PSU with four variable outputs Vepac Electronics
Test & Measurement
The PeakTech 6215 is a laboratory power supply with four separate voltage outputs, each one infinitely variable using the rotary controls on the front of the unit.
Read more...Digital accelerometer for high dynamics applications RS South Africa
Test & Measurement
TDK extends its Tronics portfolio with the AXO314, a high-performance digital MEMS accelerometer with ±14 g input range for industrial applications operating under shock and vibration.
Read more...Acceleration sensors for wearables Future Electronics
Test & Measurement
Bosch Sensortec has introduced two new acceleration sensors, the BMA530 and BMA580, both offered in a compact size of only 1,2 x 0,8 x 0,55 mm.
Read more...Clearing the Static: Ionisation equipment Actum Electronics
Circuit & System Protection
Electrostatic discharge (ESD) ionisation equipment is designed to neutralise static charges that accumulate on surfaces in environments where ESD-sensitive components or materials are handled. These ...
printer friendly version