Enclosures, Racks, Cabinets & Panel Products


Sealed polycarbonate and ABS enclosures

14 November 2018 Enclosures, Racks, Cabinets & Panel Products

Optimised for use in harsh industrial environments, the 1554 flat lid and 1555 styled lid ranges of ABS and UV stabilised polycarbonate enclosures from Hammond Manufacturing provide IP66 sealing and good mechanical protection.

The light grey RAL 7035 enclosures are designed to house printed circuit boards or DIN rail mounted components. IP66 sealing is achieved through a one-piece silicone gasket in a tongue and groove seal. 23 sizes from 66 x 66 x 41 mm to 239 x 160 x 119 mm are available with flat and styled self-coloured, clear and translucent lids. Flanged lids for 10 sizes, from 119 x 66 x 42 mm to 180 x 119 x 62 mm, provide increased security by preventing access to the interior without removing the enclosure from the surface to which it is attached.

The styled lids include a recess suitable for mounting a membrane keyboard and are also fitted with PCB mounting bosses. Bases are fitted with internal DIN rail mounting tabs in all but two sizes, and standoffs for mounting PCBs or optional internal panels are provided in all versions.

To avoid any possible corrosion problems, the base inserts and self-captivating lid screws are both stainless steel, located outside the gasket; additional holes in the base, again outside the gasket seal, are provided to allow the enclosure to be wall- or shelf-mounted. An optional foot kit is also available.

Optional steel panels suitable for mounting heavy components can be fitted to the integral mounting points in the base; the bases also feature moulded slots to enable 1,6 mm thick PCBs to be mounted vertically into the enclosure.

For more information contact Communica, +27 (0)12 657 3500, [email protected], www.communica.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

High visibility 4-digit panel ammeters
Electrocomp Enclosures, Racks, Cabinets & Panel Products
The MP-335PAS-1 is a 4-digit 7-segment red display ammeter with a measurement range of 4 to 20 mA and a very low power consumption.

Read more...
Multi-channel SMPS cable assemblies
RFiber Solutions Enclosures, Racks, Cabinets & Panel Products
Withwave’s multi-channel SMPS cable assemblies (WMCS Series) provide a wide range of multiple coaxial connectors and flexible cable assemblies with a choice of 26,5, 40, 50 and 67 GHz configurations.

Read more...
Building the control panels of the future
Omron Electronics Enclosures, Racks, Cabinets & Panel Products
The industrial automation world is built on robust and efficient control panels that are designed precisely and assembled to manage machines, processes and equipment across different industries.

Read more...
What’s the big deal with DPL?
Spectrum Concepts Enclosures, Racks, Cabinets & Panel Products
The dynamic performance layer (DPL) forms a key part of the construction of Nitrowave coaxial cables, Samtec’s range of high-performance RF solutions for microwave and mmWave applications.

Read more...
Flexible and high-density heat rejection system
Enclosures, Racks, Cabinets & Panel Products
The introduction of the Vertiv CoolLoop Trim Cooler supports air and liquid cooling applications for high-performance computing.

Read more...
AI domain-specific architecture
Spectrum Concepts Enclosures, Racks, Cabinets & Panel Products
Designing a new product is often an exercise in priorities, carefully balancing a range of capabilities to obtain the best overall result.

Read more...
DC to 40 GHz termination
RF Design Enclosures, Racks, Cabinets & Panel Products
The TS400HM from Inmet by Spectrum Control is a 50 O termination that operates from DC to 40 GHz, and can handle an average input power of 1 W.

Read more...
Complete electrical termination solutions for mining
Enclosures, Racks, Cabinets & Panel Products
Unlike other traditional direct-entry flameproof junction boxes that are made from steel, cast iron or aluminium, the Envirobox is made from a specially formulated, robust engineering polymer unique to Pratley, and is completely corrosion resistant.

Read more...
Popular aluminium enclosure series expanded
Sivan Electronic Supplies Enclosures, Racks, Cabinets & Panel Products
Gainta has expanded its popular G1xx series of sealed aluminium enclosures which have an IP65 rating to provide protection against dust and moisture.

Read more...
Modular sub racks, front panels and modules
Vepac Electronics Enclosures, Racks, Cabinets & Panel Products
Vero’s industry-compliant KM6 range is a modular, pluggable, 19-inch rack-based enclosure to securely house and protect electronic equipment.

Read more...