High-integration 486-based embedded processor

27 February 2002 Analogue, Mixed Signal, LSI

The EnCore 400 embedded processor is Ampro's low-cost, high-integration 486-based CPU designed to plug into a custom logic baseboard. Based on STMicroelectronics' new 133 MHz STPC Atlas processor, the EnCore 400 provides the functionality of a complete embedded CPU in a 100 x 145 mm format.

As with all EnCore modules, the EnCore 400 provides two serial ports, EPP/ECP parallel port, four USB OHCI ports, PS/2 keyboard and mouse interfaces, floppy and Ultra/DMA 33/66 IDE controllers, 10/100BaseT Ethernet interface and an AC97 audio interface. EnCore 400 supports from up to 128 MB SODIMM SDRAM, and interfaces to an application-specific logic board using a 33 MHz PCI bus. EnCore 400 also includes a 2D graphics controller which provides both CRT and TFT flat panel video interfaces.

The EnCore 400 QuickStart Kit includes a baseboard reference design, sample baseboard and board support package for popular operating systems. This product meets high quality standards for rugged environments, and includes extended temperature specifications.

Electronic Products Design

012 665 9700

Further reading:

A new era in modular I/O solutions
Rugged Interconnect Technologies Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.

Read more...

---

High voltage instrument op-amp
iCorp Technologies Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.

Read more...

---

High-speed SAR ADC simplifies design
Altron Arrow Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.

Read more...

---

2-wire quad voltage output DAC
Altron Arrow Analogue, Mixed Signal, LSI
The DAC has a 2-wire serial interface that operates at clock rates up to 400 kHz, and this interface is SMBus compatible, allowing multiple devices to be placed on the same bus.

Read more...

---

Dual-channel ADC for RF applications
RFiber Solutions Analogue, Mixed Signal, LSI
The ARF0471 from Advanced RF is a dual-channel, 14-bit, 3 GSPS ADC, which features an on-chip buffer and sample-and-hold circuit.

Read more...

---

Infineon launches Edge Ai software solution
Altron Arrow Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.

Read more...

---

16-bit voltage output denseDAC
Altron Arrow Analogue, Mixed Signal, LSI
The AD5766 uses a versatile four-wire serial interface that operates at clock rates of up to 50 MHz for write mode, and is compatible with SPI, QSPI, MICROWIRE, and DSP interface standards.

Read more...

---

AFE enables the software-defined factory
Avnet Silica Analogue, Mixed Signal, LSI
With its software configurable analogue inputs, where each input can be configured for voltage, current, resistance, or temperature, NXP’s N-AFE enables a new level of flexibility.

Read more...

---

Precision voltage reference
Altron Arrow Analogue, Mixed Signal, LSI
The ADR1001 is a fully integrated, ultra-low drift, buried Zener precision voltage reference solution in a single chip.

Read more...

---

Microphones enable low-power always-on state
Avnet Abacus Analogue, Mixed Signal, LSI
TDK Corporation has announced its InvenSense SmartSound T5848 I2S microphones to enable intelligent keyword, voice command, and sound detection at ultra-low power.

Read more...

---