Test & Measurement


Multi-channel power analyser

10 October 2018 Test & Measurement

Magnet’s range of Carlo Gavazzi products includes WM50 multi-channel power analysers, which efficiently measure main electrical variables, as well as voltage and current harmonic distortions, in a three- or single-phase system.

“This flexible device is able to view total and partial active and reactive energy consumption; up to three water, gas and heat totalisers and up to six different energy consumption tariffs,” says Stephen Rogerson, Magnet’s Johannesburg regional manager. “This system, which provides up to 16 alarms, can be integrated with accessory modules to expand its control and communication capacity. Main unit functions are increased with the addition of a maximum of two modules, which include a digital input/output module, an analog input module and a communication module.”

Three analog inputs and six digital inputs and digital outputs are managed via an optional accessory module. This system is able to transmit data to other systems and is also used to log measurements and events.

The WM50 device has been designed for quick configuration and easy installation. Detachable terminals connect to 12-channel current sensors with proprietary cables and clips are supplied with sensors to ensure efficient operation at all times. The wide backlit LED display clearly shows single and total load measurements, as well as configuration parameter values. Digital communication between current sensors and the device ensures excellent disturbance immunity.

Magnet’s range of Carlo Gavazzi automation products also includes energy management solutions, including energy meters, current transformers and energy-efficiency monitoring solutions.

For more information contact Samantha MacDonald, Magnet, +27 31 274 1998, [email protected], www.magnetgroup.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

60 MHz 16-bit AWG
Vepac Electronics Test & Measurement
Siglent’s SDG1000X Plus series function/arbitrary waveform generator offers a maximum output frequency of 60 MHz, 16-bit vertical resolution, 1 GSa/s sampling rate, and 8 Mpts arbitrary waveform length.

Read more...
AC programmable power
Accutronics Test & Measurement
TDK Corporation has announced the introduction of the TDK-Lambda brand GENESYS AC and GENESYS AC PRO series of 2 kVA and 3 kVA rated programmable AC power sources.

Read more...
QA introduces large chisel tip style probes
Techmet Test & Measurement
The two new probes have a larger diameter to provide better contact reliability.

Read more...
Digital PSU with four variable outputs
Vepac Electronics Test & Measurement
The PeakTech 6215 is a laboratory power supply with four separate voltage outputs, each one infinitely variable using the rotary controls on the front of the unit.

Read more...
High-voltage insulation resistance testers
Comtest Test & Measurement
Two new high-voltage insulation resistance testers, from Fluke, deliver accuracy and speed in industrial and solar PV applications.

Read more...
Digital accelerometer for high dynamics applications
RS South Africa Test & Measurement
TDK extends its Tronics portfolio with the AXO314, a high-performance digital MEMS accelerometer with ±14 g input range for industrial applications operating under shock and vibration.

Read more...
Acceleration sensors for wearables
Future Electronics Test & Measurement
Bosch Sensortec has introduced two new acceleration sensors, the BMA530 and BMA580, both offered in a compact size of only 1,2 x 0,8 x 0,55 mm.

Read more...
Accurate laser measurement
Avnet Silica Test & Measurement
Online Teaser: Panasonic Industry’s laser sensor has a resolution of up to 0,5 µm, a linearity of ±0,05% FS, and a high-speed sampling of 100 µs.

Read more...
Handheld analyser with wide frequency range
Vepac Electronics Test & Measurement
The PXN-400 from Harogic is a handheld spectrum analyser that covers a frequency range of 9 kHz to 40 GHz, with an analytical bandwidth of 100 MHz.

Read more...
Real-time portable spectrum analyser
Vepac Electronics Test & Measurement
The SA series from HAROGIC Technologies is designed as a compact USB real-time spectrum analyser using low SWaP principles.

Read more...