Exfo has developed an automated solution that combines testing of polarity, continuity and connector cleanliness – the critical tests needed to validate multi-fibre push-on (MPO/MTP) links – into a single solution that delivers a combination of fit, cost and reporting capabilities.
The ConnectorMax MPO link test solution pairs a light source at one end of the cable with a fibre inspection probe for analysis at the other end – a first in the industry. Additionally, it is the only all-in-one solution that provides a clear pass/fail diagnosis of MPO 12 and MPO 24 links in a single report. For customers who already own an Exfo probe, this solution is highly economical.
Telcos are reconfiguring their central offices into data centres (CORDs) and deploying MPO cables with 12, but more and more, 24 fibres. When not properly tested, multi-fibre links can put the entire health of a network at risk. Traditional solutions often fall short on design or price, can’t perform all three critical tests or don’t offer analysis and reporting capabilities. Customers are left choosing between solutions that are either too much for what they really need (and too expensive) or sorely lacking in features and fit. What’s more, they often have to buy different units to get the job done.
The ConnectorMax MPO link test solution provides a quick, reliable and less costly method to test multi-fibre cables before installation, so if outages occur technicians can be certain their pre-tested links are not the cause.
hybridNETBOX instrumentation platform Vepac Electronics
Test & Measurement
The hybridNETBOX from Spectrum Instrumentation is an innovative instrumentation platform that combines a multi-channel arbitrary waveform generator (AWG) and a digitiser in a single portable unit.
Read more...14-bit AWG at 20 GS/s Vepac Electronics
Test & Measurement
The Arb Rider AWG-7000 is the world’s fastest 14-bit Arbitrary Waveform Generator, featuring a 20 GS/s real time update rate and 14-bit vertical resolution.
Read more...Additions to APD5000 series oscilloscopes Osiris Technical Systems
Test & Measurement
Each unit is equipped with an integrated CAT II digital multimeter, three programmable power supplies, a dedicated trigger line, and an arbitrary waveform generator.
Read more...Handheld RTSA up to 9,5 GHz Vepac Electronics
Test & Measurement
The PXE-90 implements an FFT engine on the built-in FPGA and support frame compression with trace detection while ensuring no missing samples between FFT frames.
Read more...InterCal introduces a new range of calibrators Intercal
Test & Measurement
Calibration is a critical process in numerous industries, from manufacturing to healthcare, ensuring that instruments and devices provide accurate and reliable measurements.
Read more...Power Energy Meter for solar projects Mimic Components
Test & Measurement
The Mi550 Power Energy Meter is a handheld three-phase power quality analyser that connects externally with Rogowski coils or voltage-type CTs, allowing for testing without disconnection.
Read more...MT8870A for NTN NB-IoT testing Tamashi Technology Investments
Test & Measurement
Samsung Electronics has selected the Anritsu Universal Wireless Test Set MT8870A for use on the mass-production lines of the Galaxy S25.
Read more...XJLink-PF40 JTAG controller ASIC Design Services
Test & Measurement
XJTAG, a specialist in electronic testing, has released its new XJLink-PF40 JTAG controller together with version 4 of its popular PCB software testing suite.
Read more...Advanced portable spectrum analyser Vepac Electronics
Test & Measurement
HAROGIC has introduced the SAE-200, a USB-based real-time spectrum analyser that operates from 9 to 20 GHz with a 100 MHz bandwidth.
printer friendly version