Extended temperature T1/E1/CEPT telecoms transformers
26 Jan 2000
Analogue, Mixed Signal, LSI
Multitech Electronic Corporation
Linear Technology's LTC1402, a 2,2 MSa/s analog-to-digital converter (ADC) features a high-speed serial interface optimised for today's DSP and serial ports. The 80 MHz sample-and-hold bandwidth combined with 72 dB SINAD and 89 dB THD performance makes this device suitable for undersampled or narrowband communications applications. 2,2 MSa/s rate, DC performance of ±0,35 LSB INL and DNL and glueless DSP interface make the LTC1402 ideal for high-speed DSP-based data acquisition.
The LTC1402 offers input ranges of 0-4,096 V or ±2,048 V, from a single 5 V or ±5 V supplies, simplifying the connection to any signal source. In addition, a separate output logic supply allows direct connection to low voltage logic systems, such as DSPs or FPGAs with 3,3 V I/O.
The LTC1402 dissipates only 90 mW at its maximum sampling rate. It offers Nap mode that keeps the internal reference active between conversions for instant wake-up (15 mW) and a shutdown mode where the power dissipation drops to 10 µW. The low power, serial interface and narrow 16 pin SSOP package (fits in an SO-8 footprint) make this device well suited to portable data acquisition systems.
Further reading:
High-speed SAR ADC simplifies design
Altron Arrow
Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.
Read more...
2-wire quad voltage output DAC
Altron Arrow
Analogue, Mixed Signal, LSI
The DAC has a 2-wire serial interface that operates at clock rates up to 400 kHz, and this interface is SMBus compatible, allowing multiple devices to be placed on the same bus.
Read more...
Dual-channel ADC for RF applications
RFiber Solutions
Analogue, Mixed Signal, LSI
The ARF0471 from Advanced RF is a dual-channel, 14-bit, 3 GSPS ADC, which features an on-chip buffer and sample-and-hold circuit.
Read more...
Infineon launches Edge Ai software solution
Altron Arrow
Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.
Read more...
16-bit voltage output denseDAC
Altron Arrow
Analogue, Mixed Signal, LSI
The AD5766 uses a versatile four-wire serial interface that operates at clock rates of up to 50 MHz for write mode, and is compatible with SPI, QSPI, MICROWIRE, and DSP interface standards.
Read more...
AFE enables the software-defined factory
Avnet Silica
Analogue, Mixed Signal, LSI
With its software configurable analogue inputs, where each input can be configured for voltage, current, resistance, or temperature, NXP’s N-AFE enables a new level of flexibility.
Read more...
Precision voltage reference
Altron Arrow
Analogue, Mixed Signal, LSI
The ADR1001 is a fully integrated, ultra-low drift, buried Zener precision voltage reference solution in a single chip.
Read more...
Microphones enable low-power always-on state
Avnet Abacus
Analogue, Mixed Signal, LSI
TDK Corporation has announced its InvenSense SmartSound T5848 I2S microphones to enable intelligent keyword, voice command, and sound detection at ultra-low power.
Read more...
Low power, low-noise amplifier
Altron Arrow
Analogue, Mixed Signal, LSI
The ADL8141 is a low power consumption, low-noise amplifier that operates from 14 to 24 GHz, and draws a supply current of 25 mA from a 2 V supply.
Read more...
QLC Flash memory with the latest BiCS technology
EBV Electrolink
Analogue, Mixed Signal, LSI
KIOXIA has implemented the groundbreaking CBA (CMOS directly Bonded to Array) technology, which enables the creation of higher density devices and an industry-leading interface speed of 3,6nbsp;Gbps.
Read more...
printer friendly version