Computer/Embedded Technology


Biometric fingerprint reader module

16 August 2017 Computer/Embedded Technology

The GT-521F52 from ADH-tech is a high-performance fingerprint module that can be awakened by a finger touching the metal frame of the sensor. It is a one-chip module designed for integration into products with a UART port. The device is configured as a USB mass Storage device so it needs no additional effort to handle drivers.

The active area allows stable imaging and the ability to cope with mass market applications requiring both security and convenience. The reader within the device has a high performance, low power consumption 32-bit microcontroller based around an ARM Cortex-M3 processor core, on which the fingerprint algorithm is processed.

For more information contact ICORP Technologies, +27 (0)11 781 2029, [email protected], www.icorpgroup.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Generate waveforms at 10 GS/s
Vepac Electronics Computer/Embedded Technology
New flagship arbitrary waveform generator cards from Spectrum Instrumentation generate waveforms with 2,5 GHz bandwidth and 16-bit vertical resolution.

Read more...
Quad-port 10GBASE-T controller
Rugged Interconnect Technologies Computer/Embedded Technology
he SN4-DJEMBE, available from Rugged Interconnect, is a networking adaptor card for CompactPCI Serial systems, equipped with four individual controllers for 10GBASE-T.

Read more...
ESP32-P4 SoC
iCorp Technologies DSP, Micros & Memory
Espressif Systems announced its latest SoC, the ESP32-P4 which is powered by a RISC-V CPU, with an AI instructions extension, an advanced memory subsystem, and integrated high-speed peripherals.

Read more...
Wireless module supports up to 600 Mbps
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Quectel’s FCU865R is a high-performance Wi-Fi 6 and Bluetooth 5.3 LCC package module which can be used for WLAN and Bluetooth connections.

Read more...
Upgraded power inductor series
iCorp Technologies Passive Components
Sunlord’s multiphase co-fired power inductor HTF-MP series has upgraded the single-phase HTF-H products in terms of integrated applications.

Read more...
Quectel wireless module wins accolade
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The winners of the 2024 IoT Evolution 5G Leadership Award were recently announced, with Quectel walking away with an award for its modules which make 5G features more easily accessible for IoT applications, notably the company’s RG255C-GL.

Read more...
Quectel unveils SC682A LTE smart module
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The SC682A is an advanced smart module featuring multi-mode LTE Cat 4, Wi-Fi, and Bluetooth 5.1 connectivity, with integrated dual-band GNSS.

Read more...
Wireless module supports dual Bluetooth
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The FCS962N-LP from Quectel has integrated dual Bluetooth, which allows the module to support both Bluetooth LE Audio and BLE long-range.

Read more...
Two-stage linear RF power amplifier
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The CMX90A006 from CML Micro is a two-stage linear RF power amplifier delivering +33 dBm of output power over the frequency range of 860 to 930 MHz.

Read more...
Three new short-range radio modules
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The modules are the FC30R, a cost-effective, industrial-grade Wi-Fi module; the FCU743R, featuring Wi-Fi 4 and Bluetooth 5.2 capabilities; and the FCM740D, an MCU with Wi-Fi 4 and Bluetooth 5.2.

Read more...