Analogue, Mixed Signal, LSI


Fan motor drivers

9 November 2016 Analogue, Mixed Signal, LSI

ON Semiconductor has three new devices for driving 3-phase BLDC motors via 180° sinusoidal waveforms. Designed for use in cooling fans, the LV8811/3/4 have voltage ranges of 3,6 - 16 V, 6 - 16 V, and 3,6 - 16 V respectively. These highly integrated, software-less drivers reduce acoustic noise and vibration, and enable deployment of energy efficient motor controls. Controllable by a single Hall sensor, motor speed can be set by either a PWM signal or a DC voltage, and lead angle can easily be adjusted. The chips incorporate over-current, over-voltage, under-voltage and over-temperature protection. Also included are locked rotor protection and auto-recovery mechanisms. Soft startup and shutdown functionality ensures that ongoing operational stability is maintained.

Future Electronics, +27 (0)21 421 8292, [email protected], www.futureelectronics.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

USB Type-C-powered controllers
Future Electronics Power Electronics / Power Management
Diodes Incorporated has released two USB Type-C PD 3.1 extended power range sink controllers that can be embedded into battery-powered devices.

Read more...
A new era in modular I/O solutions
Rugged Interconnect Technologies Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.

Read more...
High voltage instrument op-amp
iCorp Technologies Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.

Read more...
SoC for real-time AI at the edge
Future Electronics DSP, Micros & Memory
Ambiq’s Apollo330 Plus series is purpose-built to enable always-on and real-time AI inferencing on devices.

Read more...
Evaluation kit for ML applications
Future Electronics DSP, Micros & Memory
The hardware kit includes radar, acoustic, pressure and motion sensors and integrates dual Arm Cortex-M4 and Cortex-M0+ CPU cores.

Read more...
Power relays for energy management applications
Future Electronics Power Electronics / Power Management
The Panasonic Industry HE-R Series is an energy management relay designed for single-phase or 3-phase AC charging units, combining high capacity, high switching, and low operating power into a small size power relay.

Read more...
High-speed SAR ADC simplifies design
Altron Arrow Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.

Read more...
Advanced eMMC storage solutions
Future Electronics DSP, Micros & Memory
Alliance Memory provides advanced NAND flash memory storage solutions that follow the JEDEC eMMC v5.1 standard to meet the growing demand for efficient, high-capacity storage solutions in today’s digital era.

Read more...
NPU in the most powerful STM32 processor
Future Electronics DSP, Micros & Memory
The STM32N6 is STMicroelectronics’ newest and most powerful STM32 and the first to come with the company’s Neural-ART Accelerator, a custom NPU capable of 600 GOPS.

Read more...
2-wire quad voltage output DAC
Altron Arrow Analogue, Mixed Signal, LSI
The DAC has a 2-wire serial interface that operates at clock rates up to 400 kHz, and this interface is SMBus compatible, allowing multiple devices to be placed on the same bus.

Read more...