Ingun has leveraged its expertise in developing and manufacturing spring-loaded contacts for the test equipment sector, to deliver the same high precision, technical know-how and flexibility in regard to special projects for medical technology.
The increasing quality demands in medical technology require high-grade solutions. If conventional contacts cannot satisfy the application requirements, then the use of spring-loaded contacts from Ingun can prove beneficial. The design of the contact consists of a barrel, a contacting plunger and a spiral-shaped pressure spring. This design offers a wide range of advantages.
Short-stroke probes are used as battery contacts or as a transfer pin in charging units. The test probes not only have a very compact design but also a short installation height in conjunction with a high spring force. For use directly on the PC board, Ingun recommends the series GKS-967 with a closed barrel end, so that no solder can get into the barrel during the soldering process.
Should the test probes need to be exchanged at some time, they can be installed with a receptacle. Due to the extremely short design of the receptacle (only 2,5 mm long), exchange solutions are possible even when installed directly on the PC board. Special versions as well as non-magnetic variants are available on request.
Application examples include blood analysis instruments, measurement instruments for blood sugar level, portable instruments for monitoring and supervision, hearing aids, defibrillators, portable emergency units, MR/CT tomographs, ultrasound units and wheelchairs.
60 MHz 16-bit AWG Vepac Electronics
Test & Measurement
Siglent’s SDG1000X Plus series function/arbitrary waveform generator offers a maximum output frequency of 60 MHz, 16-bit vertical resolution, 1 GSa/s sampling rate, and 8 Mpts arbitrary waveform length.
Read more...AC programmable power Accutronics
Test & Measurement
TDK Corporation has announced the introduction of the TDK-Lambda brand GENESYS AC and GENESYS AC PRO series of 2 kVA and 3 kVA rated programmable AC power sources.
Read more...Digital PSU with four variable outputs Vepac Electronics
Test & Measurement
The PeakTech 6215 is a laboratory power supply with four separate voltage outputs, each one infinitely variable using the rotary controls on the front of the unit.
Read more...Digital accelerometer for high dynamics applications RS South Africa
Test & Measurement
TDK extends its Tronics portfolio with the AXO314, a high-performance digital MEMS accelerometer with ±14 g input range for industrial applications operating under shock and vibration.
Read more...Acceleration sensors for wearables Future Electronics
Test & Measurement
Bosch Sensortec has introduced two new acceleration sensors, the BMA530 and BMA580, both offered in a compact size of only 1,2 x 0,8 x 0,55 mm.
Read more...Accurate laser measurement Avnet Silica
Test & Measurement
Online Teaser: Panasonic Industry’s laser sensor has a resolution of up to 0,5 µm, a linearity of ±0,05% FS, and a high-speed sampling of 100 µs.
Read more...Handheld analyser with wide frequency range Vepac Electronics
Test & Measurement
The PXN-400 from Harogic is a handheld spectrum analyser that covers a frequency range of 9 kHz to 40 GHz, with an analytical bandwidth of 100 MHz.
Read more...Real-time portable spectrum analyser Vepac Electronics
Test & Measurement
The SA series from HAROGIC Technologies is designed as a compact USB real-time spectrum analyser using low SWaP principles.
printer friendly version