Test & Measurement


Gen 3 PXIe chassis and system components

13 July 2016 Test & Measurement

New from Keysight Technologies comes a Gen 3 PXIe chassis and a set of Gen 3 system components designed for complex, high-performance applications. Doubling the system bandwidth, the new products improve data streaming for capture/playback applications, such as 5G and electronic warfare. The products also provide a superior platform for large multi-channel and multi-chassis PXIe test systems for applications such as MIMO and PA/FEM.

The products include an 18-slot PXIe chassis with x8 Gen 3 PCIe links to each slot, a set of single and dual-port Gen 3 PXIe system modules and PC host cards, and an improved PXIe embedded controller, now capable of Gen 3 performance.

The M9019A Gen 3 PXIe 18-slot chassis provides a high-performance system platform with a number of improvements, including a Gen 3 backplane with an x8 PCIe link to each slot and x24 (two-link) system slot; two front panel SMB trigger ports providing access to PXI Trig (0:7); one-button power control for multi-chassis power sequencing for large configurations; and a new power supply with more power for PXIe modules.

A series of PXIe system modules and PC host adaptors designed for performance and system configuration flexibility support the new M9019A chassis. Together they provide up to 16 GBps system bandwidth to an external PC. Developed for Gen 3 PC slots, the M9048B and M9049A PC host adaptors provide a connection between PC and chassis that is up to x16. Users also can configure the M9049A to provide x8 links to two chassis – either AXIe or PXIe.

The M9022A and M9023A PXIe host modules are used to establish up to a x16 Gen 3 link to the chassis. The M9023A is easily reconfigured for daisy-chaining and provide a Gen 3 x 8 link between chassis. The M9024A PXI system module adds I/O connectivity with a single cable connection to the host PC.

The M9037A PXIe high-performance embedded controller is now qualified for Gen 3 PXIe backplane performance when used in the M9019A chassis. This enables system designers to fully benefit from the improved backplane speed of the chassis.

For more information contact Lizzy Mabaso, Concilium Technologies, +27 (0)12 678 9200, [email protected], www.concilium.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

hybridNETBOX instrumentation platform
Vepac Electronics Test & Measurement
The hybridNETBOX from Spectrum Instrumentation is an innovative instrumentation platform that combines a multi-channel arbitrary waveform generator (AWG) and a digitiser in a single portable unit.

Read more...
14-bit AWG at 20 GS/s
Vepac Electronics Test & Measurement
The Arb Rider AWG-7000 is the world’s fastest 14-bit Arbitrary Waveform Generator, featuring a 20 GS/s real time update rate and 14-bit vertical resolution.

Read more...
Additions to APD5000 series oscilloscopes
Osiris Technical Systems Test & Measurement
Each unit is equipped with an integrated CAT II digital multimeter, three programmable power supplies, a dedicated trigger line, and an arbitrary waveform generator.

Read more...
Handheld RTSA up to 9,5 GHz
Vepac Electronics Test & Measurement
The PXE-90 implements an FFT engine on the built-in FPGA and support frame compression with trace detection while ensuring no missing samples between FFT frames.

Read more...
Four ways to enhance IoT battery performance using emulation software
Concilium Technologies Editor's Choice
Battery life affects the cost and reliability of IoT-based infrastructure and is a key purchasing consideration for consumer electronic IoT devices.

Read more...
InterCal introduces a new range of calibrators
Intercal Test & Measurement
Calibration is a critical process in numerous industries, from manufacturing to healthcare, ensuring that instruments and devices provide accurate and reliable measurements.

Read more...
Power Energy Meter for solar projects
Mimic Components Test & Measurement
The Mi550 Power Energy Meter is a handheld three-phase power quality analyser that connects externally with Rogowski coils or voltage-type CTs, allowing for testing without disconnection.

Read more...
MT8870A for NTN NB-IoT testing
Tamashi Technology Investments Test & Measurement
Samsung Electronics has selected the Anritsu Universal Wireless Test Set MT8870A for use on the mass-production lines of the Galaxy S25.

Read more...
XJLink-PF40 JTAG controller
ASIC Design Services Test & Measurement
XJTAG, a specialist in electronic testing, has released its new XJLink-PF40 JTAG controller together with version 4 of its popular PCB software testing suite.

Read more...
INTEGRA Biosciences’ reagent dispenser now supports SiLA-2 integration
Test & Measurement
This new functionality will make it even easier to integrate the WELLJET into automated laboratory workflows, helping labs to enhance their productivity and reproducibility.

Read more...