Test & Measurement


Battery test probes

15 June 2016 Test & Measurement

In addition to developing customer-specific solutions, PTR offers many standard battery test probes for applications like charging rechargeable batteries in mobile devices such as scanners, card readers, communication devices, etc, as well as for connecting two printed circuit boards.

Series 5099 probes are designed for a 3,00 mm centre and are available with a variety of tip styles. They feature a working travel of 1,00 mm and full travel of 1,20 mm, and have a maximum current rating of 5–8 A and typical continuity resistance no greater than 10 mΩ. Optionally, Series 5099.04 has a longer travel (3,30 mm working; 4,00 mm full) and typical continuity resistance ≤20 mΩ, and is only available with a rounded tip.

For a larger, 4,0 mm centre, Series 5110/S provides a working travel of 2,80 mm and full travel of 3,50 mm. Supplied in a variety of tip styles, this model’s maximum current rating is 10 A and typical continuity resistance is no greater than 10 mΩ.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

60 MHz 16-bit AWG
Vepac Electronics Test & Measurement
Siglent’s SDG1000X Plus series function/arbitrary waveform generator offers a maximum output frequency of 60 MHz, 16-bit vertical resolution, 1 GSa/s sampling rate, and 8 Mpts arbitrary waveform length.

Read more...
AC programmable power
Accutronics Test & Measurement
TDK Corporation has announced the introduction of the TDK-Lambda brand GENESYS AC and GENESYS AC PRO series of 2 kVA and 3 kVA rated programmable AC power sources.

Read more...
QA introduces large chisel tip style probes
Techmet Test & Measurement
The two new probes have a larger diameter to provide better contact reliability.

Read more...
Digital PSU with four variable outputs
Vepac Electronics Test & Measurement
The PeakTech 6215 is a laboratory power supply with four separate voltage outputs, each one infinitely variable using the rotary controls on the front of the unit.

Read more...
High-voltage insulation resistance testers
Comtest Test & Measurement
Two new high-voltage insulation resistance testers, from Fluke, deliver accuracy and speed in industrial and solar PV applications.

Read more...
Digital accelerometer for high dynamics applications
RS South Africa Test & Measurement
TDK extends its Tronics portfolio with the AXO314, a high-performance digital MEMS accelerometer with ±14 g input range for industrial applications operating under shock and vibration.

Read more...
Acceleration sensors for wearables
Future Electronics Test & Measurement
Bosch Sensortec has introduced two new acceleration sensors, the BMA530 and BMA580, both offered in a compact size of only 1,2 x 0,8 x 0,55 mm.

Read more...
Accurate laser measurement
Avnet Silica Test & Measurement
Online Teaser: Panasonic Industry’s laser sensor has a resolution of up to 0,5 µm, a linearity of ±0,05% FS, and a high-speed sampling of 100 µs.

Read more...
Handheld analyser with wide frequency range
Vepac Electronics Test & Measurement
The PXN-400 from Harogic is a handheld spectrum analyser that covers a frequency range of 9 kHz to 40 GHz, with an analytical bandwidth of 100 MHz.

Read more...
Real-time portable spectrum analyser
Vepac Electronics Test & Measurement
The SA series from HAROGIC Technologies is designed as a compact USB real-time spectrum analyser using low SWaP principles.

Read more...