The RTP range of Hall-effect rotary position sensors from Honeywell provide non-contact sensing in harsh transportation and industrial applications at a competitive cost.
The magnet (in a choice of bare or housed format) is separated from the sensor body, while the absence of an actuator shaft removes the wear and tear on the bearings caused by radial forces.
These products use a magnetically biased, Hall-effect integrated circuit (IC) to sense rotary movement of the actuator over a set operating range. Rotation of the actuator changes the magnet’s position relative to the IC. The resulting flux density change is converted to a linear output. The IC, together with conditioning and protection circuitry, is sealed in an IP69K-qualified rugged package for durability in most harsh environments.
Eight operating ranges from 50° to 360° are tolerant to over-travel and allow use in most common applications. Low-voltage and high-voltage versions cover an input voltage range of 4,5 V to 30 V d.c. The sensors integrate reverse polarity and short circuit protection, and are tested for EMI/EMC to automotive grade. They come with industry-standard AMP termination, 32 mm mounting pitch, North American or European pinout styles, and a compact package.
Fast and reliable 4G connectivity worldwide TRX Electronics
DSP, Micros & Memory
Powered by a powerful Quectel LTE Cat 4 modem, the Arduino Pro 4G module’s fast data throughput and high bandwidths ensure reliable and quick data download and upload, even in remote locations.
Read more...60 MHz 16-bit AWG Vepac Electronics
Test & Measurement
Siglent’s SDG1000X Plus series function/arbitrary waveform generator offers a maximum output frequency of 60 MHz, 16-bit vertical resolution, 1 GSa/s sampling rate, and 8 Mpts arbitrary waveform length.
Read more...AC programmable power Accutronics
Test & Measurement
TDK Corporation has announced the introduction of the TDK-Lambda brand GENESYS AC and GENESYS AC PRO series of 2 kVA and 3 kVA rated programmable AC power sources.
Read more...Digital PSU with four variable outputs Vepac Electronics
Test & Measurement
The PeakTech 6215 is a laboratory power supply with four separate voltage outputs, each one infinitely variable using the rotary controls on the front of the unit.
Read more...Digital accelerometer for high dynamics applications RS South Africa
Test & Measurement
TDK extends its Tronics portfolio with the AXO314, a high-performance digital MEMS accelerometer with ±14 g input range for industrial applications operating under shock and vibration.
Read more...Acceleration sensors for wearables Future Electronics
Test & Measurement
Bosch Sensortec has introduced two new acceleration sensors, the BMA530 and BMA580, both offered in a compact size of only 1,2 x 0,8 x 0,55 mm.
Read more...Accurate laser measurement Avnet Silica
Test & Measurement
Online Teaser: Panasonic Industry’s laser sensor has a resolution of up to 0,5 µm, a linearity of ±0,05% FS, and a high-speed sampling of 100 µs.
Read more...Handheld analyser with wide frequency range Vepac Electronics
Test & Measurement
The PXN-400 from Harogic is a handheld spectrum analyser that covers a frequency range of 9 kHz to 40 GHz, with an analytical bandwidth of 100 MHz.
printer friendly version