Power Electronics / Power Management


Medical-grade DC-DC converters

10 June 2015 Power Electronics / Power Management

RECOM announced the release of three new medical-grade DC-DC converters with 250 V a.c./2MOPP certification. The REM3, REM6 and REM10 series offer 3 W, 6 W or 10 W output power respectively, in a DIP24 case.

The devices feature reinforced 5 kV a.c./1 minute isolation with low 2 μA leakage and are certified to 60601-1 3rd edition for 250 V a.c. continuous operation. The compact DIP24 package offers 2:1 or 4:1 input voltage ranges and tightly regulated single and dual outputs, even under no-load conditions. The outputs are short circuit and overload protected. High efficiency of 89% means that the operating temperature is from -40°C to 105°C.

The converters are available in two different pinning options, and optionally with an external control pin for standby consumption as low as 12,5 mW. The converters are fully certified to CB, IEC/EN and ANSI/AAMI standards, carry the CE and UL marks, and come with a three-year warranty.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Power efficiency and robustness in electronics design
Power Electronics / Power Management
Mouser Electronics recently announced a new eBook in collaboration with Analog Devices highlighting essential strategies for optimising power systems.

Read more...
USB Type-C-powered controllers
Future Electronics Power Electronics / Power Management
Diodes Incorporated has released two USB Type-C PD 3.1 extended power range sink controllers that can be embedded into battery-powered devices.

Read more...
Multicell battery monitoring
Altron Arrow Power Electronics / Power Management
The LTC6811 from Analog Devices is a multicell battery stack monitor that measures up to 12 series connected battery cells with a total measurement error of less than 1,2 mV.

Read more...
Full telemetry in tiny DC-DC converters
RS South Africa Power Electronics / Power Management
The FS160* series of µPOL DC-DC converters from TDK all offer full telemetry, provide increased performance, and are remarkable for extraordinary power density in the smallest sizes.

Read more...
Power IC supplies 1650 W
EBV Electrolink Power Electronics / Power Management
Power Integrations has announced a two-fold increase in power output from the HiperLCS-2 chipset with the new device now being able to deliver up to 1650 W of continuous output power.

Read more...
High-voltage step-down DC-DC converter
Altron Arrow Power Electronics / Power Management
The MAX17793 is a high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated MOSFETs operating over an input voltage range of 3 to 80 V.

Read more...
High-voltage contactors
RS South Africa Power Electronics / Power Management
TDK Corporation has announced two new additions to its high-voltage contactor portfolio for harsh environments: the HVC43MC with integrated mirror contact and the HVC45 with enhanced short-circuit current handling capability.

Read more...
Chokes rated at 36 A
RS South Africa Power Electronics / Power Management
TDK Corporation has launched the EPCOS SurfIND series, a new range of current-compensated ring core double chokes for high currents and surface mounting.

Read more...
RF arrestor provides robust protection
RFiber Solutions Power Electronics / Power Management
NexTek’s range of coaxial RF surge and lightning arrestors are designed and built to provide robust protection for any radio or coaxial RF transmission application.

Read more...
Wide-Bandgap Developer Forum 2025
Power Electronics / Power Management
To give designers the ultimate in design flexibility, the entire range of WBG power semiconductors will be provided including discretes, modules, and highly integrated solutions ranging from 40 V to 700 V for GaN and 400 V to 3,3 kV for SiC.

Read more...