Outdoor enclosures handle extreme cold
10 June 2015
Enclosures, Racks, Cabinets & Panel Products
A new easy-access enclosure from Intertec provides a versatile alternative to free-standing cabinets for the environmental protection of field-based process instrumentation.
The enclosures are made from tough glass reinforced polyester (GRP) and include highly insulated options for use in extremely cold climates. They also offer more space than typical instrument enclosures, to allow personnel to use gloved hands when accessing the equipment.
The new enclosures are the latest addition to Intertec’s Diabox range, which are moulded two-part enclosures that open diagonally to provide easy access for operating and maintenance staff. The new Diabox 277 measures 600 x 750 x 600 mm (H x W x D) and has an internal volume of approximately 277 litres, depending on the level of insulation specified.
Despite its large size, the Diabox 277 has a very low heat transfer coefficient of 13 W/K, which minimises the power rating and operational cost of any freeze protection, anti-condensation, or temperature regulation heating that may be fitted. In the case of the ‘arctic’ version of the enclosure, its GRP-PU foam-GRP walls provide uniform and near-perfect insulation, resulting in an exceptionally low heat transfer coefficient of just 2,4 W/K.
The enclosure features a continuous double seal, comprising a mechanical tongue and groove plus a flexible silicon insert strip, which is incorporated in the mating edges to ensure high-integrity closure. As standard, it is rated to IP65 against the ingress of contaminants such as dust and moisture; for more severe applications involving prolonged exposure to driving snow or rain, IP66/67 versions are available. The ‘arctic’ version is also available with an IP68 rating.
Hundreds of accessories are available to configure the enclosure for specific applications. Among the options are viewing windows available in acrylic-, safety- or insulation-glass variants, and a special insulated adaptor to prevent heat loss at the point where impulse lines and heat tracing cables enter the enclosure.
For more information visit www.intertec.info
Further reading:
High visibility 4-digit panel ammeters
Electrocomp Express
Enclosures, Racks, Cabinets & Panel Products
The MP-335PAS-1 is a 4-digit 7-segment red display ammeter with a measurement range of 4 to 20 mA and a very low power consumption.
Read more...
Multi-channel SMPS cable assemblies
RFiber Solutions
Enclosures, Racks, Cabinets & Panel Products
Withwave’s multi-channel SMPS cable assemblies (WMCS Series) provide a wide range of multiple coaxial connectors and flexible cable assemblies with a choice of
26,5, 40, 50 and 67 GHz configurations.
Read more...
Building the control panels of the future
Omron Electronics
Enclosures, Racks, Cabinets & Panel Products
The industrial automation world is built on robust and efficient control panels that are designed precisely and assembled to manage machines, processes and equipment across different industries.
Read more...
What’s the big deal with DPL?
Spectrum Concepts
Enclosures, Racks, Cabinets & Panel Products
The dynamic performance layer (DPL) forms a key part of the construction of Nitrowave coaxial cables, Samtec’s range of high-performance RF solutions for microwave and mmWave applications.
Read more...
Flexible and high-density heat rejection system
Enclosures, Racks, Cabinets & Panel Products
The introduction of the Vertiv CoolLoop Trim Cooler supports air and liquid cooling applications for high-performance computing.
Read more...
AI domain-specific architecture
Spectrum Concepts
Enclosures, Racks, Cabinets & Panel Products
Designing a new product is often an exercise in priorities, carefully balancing a range of capabilities to obtain the best overall result.
Read more...
DC to 40 GHz termination
RF Design
Enclosures, Racks, Cabinets & Panel Products
The TS400HM from Inmet by Spectrum Control is a 50 O termination that operates from DC to 40 GHz, and can handle an average input power of 1 W.
Read more...
Complete electrical termination solutions for mining
Enclosures, Racks, Cabinets & Panel Products
Unlike other traditional direct-entry flameproof junction boxes that are made from steel, cast iron or aluminium, the Envirobox is made from a specially formulated, robust engineering polymer unique to Pratley, and is completely corrosion resistant.
Read more...
Popular aluminium enclosure series expanded
Sivan Electronic Supplies
Enclosures, Racks, Cabinets & Panel Products
Gainta has expanded its popular G1xx series of sealed aluminium enclosures which have an IP65 rating to provide protection against dust and moisture.
Read more...
Modular sub racks, front panels and modules
Vepac Electronics
Enclosures, Racks, Cabinets & Panel Products
Vero’s industry-compliant KM6 range is a modular, pluggable, 19-inch rack-based enclosure to securely house and protect electronic equipment.
Read more...
printer friendly version