Analogue, Mixed Signal, LSI


Two audio amps with high PSRR

10 October 2001 Analogue, Mixed Signal, LSI

National Semiconductor's LM4894 and LM4895 'Boomer' audio amplifiers, optimised for the cellphone market, deliver superior PSRR performance.

This reduces the effect of noise on power supply lines being picked up and intensified by the audio amplifier. When the input is terminated with a 10 Ohm, resistive load, the LM4894/5 deliver 80 dB PSRR at 217 Hz at 3 V. With the input floating they deliver 87 dB PSRR at 217 Hz at 3 V. They have 50 dB of CMRR, a specification not possible in typical BTL configuration amplifiers, claims the manufacturer. The devices are optimised to save power by operating at a low supply voltage (3 V), while still providing sufficient output power (350 mW, 8 Ohm, <1%THD) - suitable for normal listening and speakerphone and ringer tone amplification. The LM4894 and LM4895 are available in 9-bump micro SMD, 10-pin LLP and 10-pin MSOP packaging.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Altron celebrates 60th birthday with a call to rebuild Johannesburg
Altron Arrow News
Altron is celebrating its 60th birthday by honouring Johannesburg’s heritage and encouraging business, government and civil society to come together and respond to our President’s call to rebuild Johannesburg.

Read more...
KIOXIA pioneer new 3D Flash technology
EBV Electrolink DSP, Micros & Memory
KIOXIA Corporation and Sandisk Corporation have pioneered a state-of-the-art 3D flash memory technology, setting the industry benchmark with a 4,8 Gb/s NAND interface speed, superior power efficiency, and heightened density.

Read more...
Super-fast H.264 encoder FPGA core
EBV Electrolink DSP, Micros & Memory
An ITAR-compliant H.264 core designed for AMD FPGAs provides baseline H.264 support and is currently the smallest and fastest FPGA core in the industry.

Read more...
Reference board for cardio monitoring
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The STDES-ESP01 reference board from STMicroelectronics demonstrates the capability of the ST1VAFE6AX and ST1VAFE3BX biosensors to detect ECG and SCG signals.

Read more...
ST MCUs extend ultra-low power innovation
Altron Arrow DSP, Micros & Memory
STMicroelectronics has introduced new STM32U3 microcontrollers with cutting-edge power-saving innovations that ease deployment of smart connected tech, especially in remote locations.

Read more...
Multicell battery monitoring
Altron Arrow Power Electronics / Power Management
The LTC6811 from Analog Devices is a multicell battery stack monitor that measures up to 12 series connected battery cells with a total measurement error of less than 1,2 mV.

Read more...
A new era in modular I/O solutions
Rugged Interconnect Technologies Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.

Read more...
High voltage instrument op-amp
iCorp Technologies Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.

Read more...
Innovative satellite navigation receiver
Altron Arrow Telecoms, Datacoms, Wireless, IoT
STMicroelectronics has released an innovative satellite navigation receiver to democratise precise positioning for automotive and industrial applications.

Read more...
LED driver for industrial power supply indication
Altron Arrow Editor's Choice Circuit & System Protection
A simple and small solution for driving an LED to provide visual feedback in the presence/absence of a system’s power using a chip not originally designed for this purpose.

Read more...